From b63ca440942bf19a59e6300324736122b3a7cbcc Mon Sep 17 00:00:00 2001 From: docgalaxyblock Date: Mon, 23 Oct 2023 16:22:17 +0200 Subject: [PATCH] docs: updated prebuild images config path note from `~/klipper_config` to `~/printer_data` MainsailOS loads the moonraker.conf from `~/printer_data/config/` Source: [MainsailOS moonraker](https://github.com/mainsail-crew/MainsailOS/tree/develop/src/modules/moonraker/filesystem/home/pi) [MainsailOS klipper](https://github.com/mainsail-crew/MainsailOS/blob/develop/src/modules/klipper/config#L28) Signed-off-by: Joshua Schlicker --- docs/configuration.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/configuration.md b/docs/configuration.md index 70d703130..242e85452 100644 --- a/docs/configuration.md +++ b/docs/configuration.md @@ -2,7 +2,7 @@ This document describes Moonraker's full configuration. By default Moonraker loads the configuration file from `~/moonraker.conf`, however prebuilt images such as MainsailOS and FluiddPi configure Moonraker to load the -configuration from `~/klipper_config/moonraker.conf`. +configuration from `~/printer_data/config/moonraker.conf`. As this document references configuration for both Klipper (`printer.cfg`) and Moonraker (`moonraker.conf`), each example contains a comment indicating