part 12 equal high and low.png
part 12 permanent high.png
part 12 permanent low.png
part 12 without antenna.png
part 14 button pushed.png
part 14 button released.png
part 14 high frequency.png
Part 01 Installing Raspbian with unattended WLAN and SSH configuration on a Raspberry Pi.md
Part 02 Using Visual Studio 2017 for developing C or C++ applications on a Raspberry Pi.md
Part 03 Accessing physical memory with C++ on a Raspberry Pi.md
Part 04 Controlling GPIO ports with C++ on a Raspberry Pi - blinking LED.md
Part 05 Detecting a pressed button with C++ on a Raspberry Pi.md
Part 06 Reading the system timer with C++ on a Raspberry Pi.md
Part 07 Reading a HC-SR04 sensor with C++ on a Raspberry Pi - ultrasonic distance measurement.md
Part 08 Reading a DHT11 sensor with C++ on a Raspberry Pi - temperature and humidity.md
Part 09 Reading a BMP180 sensor with C++ through I2C on a Raspberry Pi - temperature and pressure.md
Part 10 Using a HD44780 20x4 LCD display to display text with C++ on a Raspberry Pi.md
Part 11 Using a HD44780 20x4 LCD display with I2C to display text with C++ on a Raspberry Pi.md
Part 12 Using a 433 MHz sender and receiver for transferring data with C++ on a Raspberry Pi.md
Part 13 Reading a DHT11 sensor with C as a linux device driver on a Raspberry Pi - temperature and humidity.md
Part 14 Detecting a pressed button with C as a linux device driver on a Raspberry Pi.md
Part 15 Optimized reading of a DHT11 sensor with C as a linux device driver on a Raspberry Pi - temperature and humidity.md
You can’t perform that action at this time.