Taranis X-lite Pro with Buildin Bluetooth #112
Comments
|
Hallo, I found this post: I have a R9mini, here is the log: |
|
Hi. You can try to use this version https://github.com/CrazyDude1994/android-taranis-smartport-telemetry/releases/tag/1.8.3 |
|
In this Version I have 2 versions in the menu for bluetooth. |
|
i had the same issue before , xlite pro, r9m lite pro, r9mini but now it work ok. |
How to pairing to android. Whats do u change name in bluetooth in your transmitter? |
|
xlite |
|
I habe small letters and also switched on the location, but do not work the app crashed also as bevor |
|
https://github.com/CrazyDude1994/android-taranis-smartport-telemetry/releases/tag/1.8.4 please try this. It still may crash, but atleast I should receive a crash report. Also after this, go to the "Settings" menu, scroll to the bottom and press "Copy debug info" then paste that info here |
|
Hallo, I installed this version start the app the I press clear then I connect to Hello via LE. App crashed. I restart the app go to the settings and to copy debug, but it's empty. Is it written to a file also? So I can have a second look? |
|
Do you have a Xiaomi or a Huawei device? |
|
Yes it's a Huawei phone |
|
I've seen crash report from your phone. I'll try to fix the issue. Also you can try to fix it yourself. Try go the application settings in Android settings, and give it a Storage permission manually, and try again |
|
I already check this bevor but did not help see atacched images
|
|
Ok now it do not crash anymore, but the connection failed [2021.04.30 06:47] Connect to bl. Type[1] isBle[false] bondState[12] uuids[00001101-0000-1000-8000-00805f9b34fb,00000000-0000-1000-8000-00805f9b34fb,00000000-0000-1000-8000-00805f9b34fb] |
|
[2021.04.30 06:47] Connect to bl. Type[1] isBle[false] bondState[12] uuids[00001101-0000-1000-8000-00805f9b34fb,00000000-0000-1000-8000-00805f9b34fb,00000000-0000-1000-8000-00805f9b34fb] |
|
Give more info about your setup. What FC firmware do you have, which protocol do you use, your TX and RX |
|
I use betaflight 4.2.8, opentx 2.3.11 with access Protokoll for taranis with 868mhz . Frsky R9M Lite Pro 900MHz Transmitter Module. Is this all what you need to know? |
|
ACCESS protocol is not supported |
|
Ok thx for the information will it maybe suported later? |
|
Probably |
|
i use xlite pro, r9m lite pro, access. I Name TX Bluetooth to short name "xlt", give it all permission to access store and location. turn on location and bluetooth before connect. |
|
How does it work with access if it's not supported? Can you post a picture von taranis how your configuration is also the reciver options you have selected? |
|
i dont know but it work, lastest access FW, r9m lite pro, f.port and s.port both work, r9mm, r9mini, r9mx. All work well. and R-xrs 2.4ghz access work too. |
|
ok I have tested this some minutes ago again and same probelm as bevor. have also changed name to xlt. Change access off app manually turn on bluetooth and Position and connect and then after some section get again connection failed. |
|
i have the same issue before, but after try to remove and install app some time, it work. |
|
hey, try to turn off wifi on your phone. |
|
hi thx for this, but same problem get no connection. connection failed |
|
Hi, I mounted an internal bluetooth module in my RM TX16s. This is a RF-SM-02 loaded with Frsky firmware. [2021.06.22 20:16] BLE state STATE_DISCONNECTED If this is of any help... |
|
It means that no supported protocol was detected, which means either:
|
|
Thanks, When you say I may be using unsupported protocol, what protocol are talking of ? I have binded RX with D16. It returns RSSI on my radio, and it displays correctly on my inav lua telemetry widget. For my test I did not plug any other sensor. Is there a procedure to find out which one of the three possibilities is true among used protocol, data retrieved or corrupted ? I do have oscilloscope / digital analyzer and other basic means to investigate. Thanks for your help, |
|
Got it working. Tanks. Rssi wasn't enough... |
|
How did you get it working? Can you explain what you change? |
|
Ok now I also get it, didn switch on the drone l, so maybe on wrong protocol detection wite also a information in the app that you have to switch on the drone maybe I'm Stupid 😂 |
I plugged sensors to the rx, instead of only relying on tx voltage and rssi values.... and it started working. |
|
Ok now I also get it, now I positioned my drone outside and wait for gps and not doing it in my house as before. |
|
Only managed to connect and get data once with v.1.9.2 From debug info I see: So it stopped detecting the protocol. This is getting telemetry from CRSF, latest version v6.10. |
Hallo, I have a Taranis X-lite Pro with Buildin Bluetooth. I activate the Bluetooth in the Taranis and then I can see in the App unter Bluetooth connection the "Hello" Name. I select this and it takes some seconds then I get connectain Failed.
It do not ask me the Code "000000". What could be the reason?
The text was updated successfully, but these errors were encountered: