macros.cfg

[gcode_macro PRINT_START]
gcode:
     M204 X Y S15000
     M117 Z_Calbrating...
     STATUS_CALIBRATING_Z   #ToolHead LED
     M117 Tilting...
     Z_TILT_ADJUST
     M117 Meshing...
     STATUS_MESHING         #ToolHead LED
     BED_MESH_CLEAR
     BED_MESH_CALIBRATE
     G1 Z10 F2400
     G1 X-30 Y50 F27000
     SKEW_PROFILE LOAD=my_skew

[gcode_macro PURGE]
gcode:     
     M117 Cleaning...
     G1 Z0.1 F1000
     G92 E0
     G1 X-30 Y50 E6.0 F120
     G1 X-15 Y50 F6000 
     G92 E0
     INNER_LED_OFF
     INNER_LED_ON
     G1 Z0.3 F1000
     G1 E10.0 F150
     G92 E0
     G1 X-15 Y100 E6.05
     G92 E0
     G1 X-10 Y100 E0.55
     G92 E0
     G1 X-10 Y80 E2.38
     G92 E0
     G1 X-20 Y80 E1.15
     G92 E0
     M117 Printing...

[gcode_macro echo_moment_vars]
description: Echo MomentOS variables to the console.
gcode:
  {% for var, value in printer["gcode_macro Moment"].items() %}
    {action_respond_info(var ~ ": " ~ value)}
  {% endfor %}
  
[gcode_macro ECHO_MOMENTOS_VARS]
description: Echo MomentOS variables to the console.
gcode:
  {% for var, value in printer["gcode_macro MomentOS"].items() %}
    {action_respond_info(var ~ ": " ~ value)}
  {% endfor %}
  
[gcode_macro MomentOS]
description: MomentOS variable storage macro, will echo variables to the console when run.
variable_relative_extrusion: False
variable_force_absolute_position: False
variable_preheat_extruder: True
variable_preheat_extruder_temp: 150
variable_calibrate_bed_mesh: True
variable_nozzle_priming: "primeblob"
variable_nozzle_prime_start_x: "max" # min, max or number
variable_nozzle_prime_start_y: "min" # min, max or number
variable_nozzle_prime_direction: "auto" # auto, forwards, backwards
variable_filament_unload_length: 130
variable_filament_unload_speed: 6000
variable_filament_load_length: 80
variable_filament_load_speed: 20
variable_start_print_park_in: "back"
variable_end_print_park_in: "back"
variable_pause_print_park_in: "front"
variable_macro_travel_speed: 150
variable_macro_z_speed: 15
variable_end_print_park_z_hop: 20
variable_homing: "endstops"
variable_z_probe: "static"
variable_safe_home_x: "middle"
variable_safe_home_y: "middle"
variable_stowable_probe_stop_on_error: False
gcode:
  ECHO_MOMENTOS_VARS

[gcode_macro PAUSE]
description: Pauses the printer
rename_existing: PAUSE_BASE
variable_extrude: 1.5
gcode:
  M117 Pause...
  SAVE_GCODE_STATE NAME=PAUSE_state
  # Define park positions 
  {% set E = printer["gcode_macro PAUSE"].extrude|float %}
  {% set speed = printer["gcode_macro MomentOS"].macro_travel_speed|float * 60 %}
  {% set z_speed = printer["gcode_macro MomentOS"].macro_z_speed|float * 60 %}
  # Calculate safe Z position
  {% set max_z = printer.toolhead.axis_maximum.z|float %}
  {% set act_z = printer.toolhead.position.z|float %}
  {% if act_z < (max_z - 20.0) %}
      {% set z_safe = 20.0 %}
  {% else %}
      {% set z_safe = max_z - act_z %}
  {% endif %}
  PAUSE_BASE
  G91
  # Retract
  {% if printer.extruder.can_extrude|lower == 'true' %}
    G1 E-{E} F2100
  {% else %}
    {action_respond_info("Extruder not hot enough")}
  {% endif %}
  # Move to park position
  {% if "xyz" in printer.toolhead.homed_axes %}
    G1 Z{z_safe} F{z_speed}
    _PARK LOCATION={printer["gcode_macro MomentOS"].pause_print_park_in} X={printer["gcode_macro MomentOS"].pause_print_park_x}
  {% else %}
    {action_respond_info("Printer not homed")}
  {% endif %} 

[gcode_macro RESUME]
description: Resumes the print if the printer is paused.
rename_existing: RESUME_BASE
gcode:
  M117 Printing...
  STATUS_PRINTING
  {% set E = printer["gcode_macro PAUSE"].extrude|float %}
  # Prime
  {% if printer.extruder.can_extrude|lower == 'true' %}
    G91
    G1 E{E} F2100
    G90
  {% else %}
    {action_respond_info("Extruder not hot enough")}
  {% endif %}
  RESTORE_GCODE_STATE NAME=PAUSE_state MOVE=1
  RESUME_BASE

[gcode_macro CANCEL_PRINT]
description: Cancels the printer
rename_existing: CANCEL_PRINT_BASE
gcode:
  M117 Cancel...
  END_PRINT
  CLEAR_PAUSE
  CANCEL_PRINT_BASE

[gcode_macro END_PRINT]
description: End print procedure, use this in your Slicer.
gcode:
  SAVE_GCODE_STATE NAME=end_print_state
  {% set z_max = printer.toolhead.axis_maximum.z %} 
  G92 E0
  G0 E-1.0 F6000                 ; rectract
  G1 Z{z_max}                    ; move Z max
  G28 X                          ; move X home
  G28 Y                          ; move Y home
  G92 E0
  G1 E5 F3600                    ; extrude
  M107                           ; parts fan off (on is M106)
  M84                            ; motor off 
  M104 S0                        ; hotend off
  M140 S0                        ; bed off
  G91                            ; relative positioning
  BED_MESH_CLEAR
  STATUS_READY
  INNER_LED_OFF
  INNER_LED_ON
  SET_TMC_CURRENT STEPPER=stepper_z CURRENT=0.6
  SET_TMC_CURRENT STEPPER=stepper_z1 CURRENT=0.6
  SET_TMC_CURRENT STEPPER=stepper_z2 CURRENT=0.6
  SET_SKEW CLEAR=1
  M106 P3 S51 #(SET_FAN_SPEED FAN=Exhaust_fan SPEED=0.2)
  #M106 P2 S0 #(SET_FAN_SPEED FAN=Auxiliary_fan SPEED=0)
  M117 Finished...
  RESTORE_GCODE_STATE NAME=end_print_state

[gcode_macro _END_PRINT_PARK]
gcode:
  _PARK LOCATION={printer["gcode_macro MomentOS"].end_print_park_in} X={printer["gcode_macro MomentOS"].end_print_park_x}

[gcode_macro _PARK]
gcode:
  {% set speed = printer["gcode_macro MomentOS"].macro_travel_speed|float * 60 %}
  # Get X position
  {% if params.X != '' %}
    {% if params.X|float >= printer.toolhead.axis_minimum.x + 5 and params.X|float <= printer.toolhead.axis_maximum.x - 5 %}
      {% set safe_x = params.X|float %}
    {% else %}
      {action_respond_info('The requested X co-ordinate is outside the defined axis bounds - using defaults')}
      {% set safe_x = printer.toolhead.axis_maximum.x / 2 %}
    {% endif %}
  {% else %}
    {% set safe_x = printer.toolhead.axis_maximum.x / 2 %}
  {% endif %}
  # Get Y position
  {% if params.LOCATION|default('back')|lower == 'back' %}
    {% set y = printer.toolhead.axis_maximum.y - 5 %}
  {% elif params.LOCATION|lower == 'front' %}
    {% set y = printer.toolhead.axis_minimum.y + 5 %}
  {% elif params.LOCATION|lower == 'center' %}
    {% set y = printer.toolhead.axis_maximum.y / 2 %}
  {% endif %}
  G90 
  G0 X{safe_x} Y{y} F{speed} 

[gcode_macro M600]
description: Executes a color change by pausing the printer an unloading the filament.
gcode:
  PAUSE
  UNLOAD_FILAMENT
  M117 Please load new filament and resume

[gcode_macro M601]
description: Puase macro
gcode:
  PAUSE
  UNLOAD_FILAMENT
  M117 Please load new filament and resume

[gcode_macro UNLOAD_FILAMENT]
description: Unloads the filament. The function is applied to the screen.
gcode:
  SAVE_GCODE_STATE NAME=unload_state
      {% set current_temp = printer.extruder.temperature %}
      {% if current_temp >= 215 %}
    {% set unload_speed = printer["gcode_macro MomentOS"].filament_unload_speed|float * 60 %}
    {% set unload_length = printer["gcode_macro MomentOS"].filament_unload_length|float %}
    STATUS_LOAD_UNLOAD
    M117 Unloading filament...
    G92 E0 #Reset the current position of the extruder. Unloading without this command may cause a lot of motor spinning or an "extrude only move too long" error.
    G0 E5 F3600 # Push back the filament to smash any stringing 
    G0 E-45 F6000 # Extract back fast into the cold zone
    # Start - Cooling, hardening, shaping filament process 
    G4 P15000 # Wait for 15 seconds  
    # End - Cooling, hardening, shaping filament process   
    G0 E-{unload_length} F{unload_speed} # Extract quickly to ensure no seals or blockages.
    #M400 # Wait for purge to complete
    STATUS_READY
    M117 Filament unloaded...
  {% endif %}
  RESTORE_GCODE_STATE NAME=unload_state

[gcode_macro LOAD_FILAMENT]
description: Loads new filament. The function is applied to the screen.
gcode:
  SAVE_GCODE_STATE NAME=load_state
    {% set current_temp = printer.extruder.temperature %}
    {% if current_temp < 215 %}
        M117 Heating...
        M104 S215
        TEMPERATURE_WAIT SENSOR=extruder MINIMUM=215
    {% endif %}
  {% set load_speed = printer["gcode_macro MomentOS"].filament_load_speed|float * 60 %}
  {% set load_length = printer["gcode_macro MomentOS"].filament_load_length|float %}
  M117 Loading filament...
  STATUS_LOAD_UNLOAD
  G92 E0 #Reset the current position of the extruder. Unloading without this command may cause a lot of motor spinning or an "extrude only move too long" error.
  G0 E{load_length} F{load_speed} # Load the filament into the hotend area.
  G4 P1000  # Wait a secod
  G0 E100 F100 # Purge
  #M400 # Wait for purge to complete
  STATUS_READY
  M117 Filament loaded...
  RESTORE_GCODE_STATE NAME=load_state

#####################################################################
#    Inner LED Macro
#####################################################################

[gcode_macro INNER_LED_SEMI_HEATING]
gcode:
 SET_LED LED="Inner_LED" RED=1 GREEN=0.2 BLUE=0 WHITE=0 SYNC=0 TRANSMIT=1

[gcode_macro INNER_LED_HEATING]
gcode:
 SET_LED LED="Inner_LED" RED=1 GREEN=0 BLUE=0 WHITE=0 SYNC=0 TRANSMIT=1

[gcode_macro INNER_LED_ON]
gcode:
 SET_LED LED="Inner_LED" RED=0.5 GREEN=0.5 BLUE=0.5 WHITE=1 SYNC=0 TRANSMIT=1

[gcode_macro INNER_LED_OFF]
gcode:
 SET_LED LED="Inner_LED" RED=0 GREEN=0 BLUE=0 WHITE=0 SYNC=0 TRANSMIT=1

#####################################################################
#    Toolhead LED Macro
#####################################################################

[gcode_macro TOOLHEAD_LED_ON]
gcode:
 SET_LED LED="Toolhead_LED" RED=0.5 GREEN=0.5 BLUE=0.5 WHITE=1

[gcode_macro TOOLHEAD_LED_OFF]
gcode:
 SET_LED LED="Toolhead_LED" RED=0 GREEN=0 BLUE=0 WHITE=0


#####################################################################
#    PID
#####################################################################

[gcode_macro PID_Hotend230]
gcode:
 PID_CALIBRATE HEATER=extruder TARGET=230

[gcode_macro PID_Hotend280]
gcode:
 PID_CALIBRATE HEATER=extruder TARGET=280

[gcode_macro PID_Bed_Heater60]
gcode:
 PID_CALIBRATE HEATER=heater_bed TARGET=60

[gcode_macro PID_Bed_Heater100]
gcode:
 PID_CALIBRATE HEATER=heater_bed TARGET=100

#####################################################################
#    R&D
#####################################################################

[gcode_macro Calibration_IS_X]
gcode:
 TEST_RESONANCES AXIS=X

[gcode_macro Calibration_IS_Y]
gcode:
 TEST_RESONANCES AXIS=Y

[gcode_macro Auto_Calibration_IS_XY]
gcode:
 SHAPER_CALIBRATE

#####################################################################
#    ETC
#####################################################################

[gcode_macro T0]
gcode:

[gcode_macro PROBE_ACCURACY_Samples]
gcode:
     M140 S60
     M104 S150 
     M190 S60
     M109 S150
     G28
     PROBE_ACCURACY samples=100
     G1 Z50 F2400
     M104 S0
     M140 S0