ATRAGMX Gun tab bug

[ZachKz]

Mods (complete and add to the following information):

• Arma 3: 2.18.152405 stable
• CBA: 3.18.1 stable
• ACE3: 3.18.1 stable

Description:
Error involving the Gun page on the ATRAG MX. When you open the Gun page, make any edits or make no edits, and hit "done" button specifically it will alter the elevation hold for the ammo profile in the atrag up by a considerable mil value. If you save it at this point the gun profile is permanently altered and ruined as far as I'm aware. This error can only occur once from a fresh profile, saving it will make it permanent. You can reload the ammo profile from the list to revert it. Once fixed you can make the glitch happen again using the same steps.

Steps to reproduce:

1. Open any ammo profile on the ATRAGMX.
2. Test that the profile shoots accurately. (The issue only occurs once, it will not repeatedly if you have already caused it to occur so test that the ammo profile is not yet corrupted. If your ammo profile is shooting high then you have probably already corrupted this ammo profile and need to use another or reset all profiles)
3. Note the current Elevation Hold value.
4. Click on the grey "Gun" button near the top left of the Atrag.
5. Without changing anything, simply hit "done". (A note, this will still occur if you change something. I verified by changing the muzzle velocity in the Gun page by 1 up or down so as to not cause a reason for a major deviation in calculation)
6. Check and note that the Elevation Hold value has gone up by some value typically < 1.

Expected behavior:
When you hit done on the gun page with or without alterations the contents, it should not drastically alter the calculated holds for the ammo profile. The fact that it happens with no alterations and simply hitting done removes the possibility of human error causing the sudden drastic change in the holds.

Where did the issue occur?

• Dedicated / Self-Hosted Multiplayer / Singleplayer / Editor (Singleplayer) / Editor (Multiplayer) / Virtual Arsenal
  All of the above.

Log Files:

• Link to (gist or pastebin) to the client and/or server RPT file. An instruction to find your RPT files can be found here.
  RPT file: https://pastebin.com/Hw4EdVFS

Additional context:
Issue wasn't present prior to the last ACE update.

Screenshots:
Imgur images for reference: https://imgur.com/a/vqZD6wd

[vuther-316]

I have also experienced this issue

[PabstMirror]

Should be fixed by #10431 in next release

[ZachKz]

Should be fixed by #10431 in next release

If you do know, when abouts will the next ACE release be?

[BaerMitUmlaut]

When it's ready 👍