Skip to content

Latest commit

 

History

History
63 lines (43 loc) · 1.88 KB

README.md

File metadata and controls

63 lines (43 loc) · 1.88 KB

uConsole Scripts for postmarketOS

This repository contains scripts for configuring and optimizing the uConsole device running on postmarketOS. These scripts enable easy adjustments to system performance, overclocking, and CPU settings, tailored specifically for a 4-CPU setup.

Table of Contents

Scripts

1. set_overclock.sh

This script modifies /boot/config.txt to apply custom overclock settings to enhance device performance. It adds the following parameters to the configuration file:

  • over_voltage=6
  • arm_freq=2147
  • gpu_freq=750

The script checks if these values are already in place to avoid duplicate entries, ensuring a clean configuration.

Usage

chmod +x set_overclock.sh
./set_overclock.sh

2. set_governor.sh

This script sets the CPU governor for all 4 CPUs to "performance" mode, aiming to maintain maximum CPU frequency for improved processing speed. After applying the "performance" setting, the script reads back the governor values to verify the update.

Usage

chmod +x set_governor.sh
./set_governor.sh

Requirements

  • sudo access is required to modify system settings.
  • postmarketOS environment, specifically configured for the uConsole device.

Usage

  1. Clone the repository and navigate to the directory.
  2. Make the scripts executable: 
    chmod +x set_overclock.sh set_governor.sh
  3. Run each script as needed, following the usage instructions provided.

Contributing

Contributions are welcome! Please submit pull requests or open issues for feature suggestions, bug fixes, or other improvements.

License

This repository is open-source and licensed under the MIT License.