README.md

homekit-markisol

Adds homekit support to Markisol protocol 433.92MHz motorized window shades. Arduino code adapted from https://github.com/akirjavainen/markisol.

Requirement

1. A 433.92MHz transmitter
2. An Arduino board directly connected to the computer running homebridge via USB.

Usage

1. Install your 433.92MHz transceiver to data pin 7 (configurable in TRANSMIT_PIN in <repo root>\Arduino\Arduino.ino).
2. While in the repo root directory,

npm install Homebridge -g

3. Modify your config.json in %USERPROFILE%\.homebridge following the example in the config.json in this repo.
4. Run HomeKit.