does mojo support termux proot-distro?

[l1t1]

I can install modular, but failed at the steps of

root@localhost:~# curl https://get.modular.com | MODULAR_AUTH=mut_1234..... sh -
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100  3855  100  3855    0     0   3689      0  0:00:01  0:00:01 --:--:--  3696
Executing the  setup script for the 'modular/installer' repository ...

   OK: Checking for required executable 'curl' ...
   OK: Checking for required executable 'apt-get' ...
   OK: Detecting your OS distribution and release using system methods ...
 ^^^^: ... Detected/provided for your OS/distribution, version and architecture:
 >>>>:
 >>>>: ... distro=ubuntu  version=22.04  codename=jammy  arch=aarch64
 >>>>:
   OK: Checking for apt dependency 'apt-transport-https' ...
   OK: Checking for apt dependency 'ca-certificates' ...
   OK: Checking for apt dependency 'gnupg' ...
   OK: Checking for apt signed-by key support ...
   OK: Importing 'modular/installer' repository GPG keys ...
   OK: Checking if upstream install config is OK ...
   OK: Installing 'modular/installer' repository via apt ...
   OK: Updating apt repository metadata cache ...
   OK: The repository has been installed successfully - You're ready to rock!

Reading package lists...
Building dependency tree...
Reading state information...
The following additional packages will be installed:
  libpython3.10 libpython3.10-dev libpython3.10-minimal libpython3.10-stdlib python3-pip-whl python3-setuptools-whl python3-venv
  python3.10 python3.10-dev python3.10-minimal python3.10-venv
Suggested packages:
  python3.10-doc binfmt-support
The following NEW packages will be installed:
  python3-pip-whl python3-setuptools-whl python3-venv python3.10-venv
The following packages will be upgraded:
  libpython3.10 libpython3.10-dev libpython3.10-minimal libpython3.10-stdlib modular python3.10 python3.10-dev python3.10-minimal
8 upgraded, 4 newly installed, 0 to remove and 72 not upgraded.
Need to get 64.9 MB of archives.
After this operation, 2898 kB of additional disk space will be used.
Get:1 http://mirrors.tuna.tsinghua.edu.cn/ubuntu-ports jammy-updates/main arm64 python3.10-dev arm64 3.10.12-1~22.04.3 [507 kB]
Get:2 http://mirrors.tuna.tsinghua.edu.cn/ubuntu-ports jammy-updates/main arm64 libpython3.10-dev arm64 3.10.12-1~22.04.3 [4664 kB]
Get:3 http://mirrors.tuna.tsinghua.edu.cn/ubuntu-ports jammy-updates/main arm64 libpython3.10 arm64 3.10.12-1~22.04.3 [1882 kB]
Get:4 http://mirrors.tuna.tsinghua.edu.cn/ubuntu-ports jammy-updates/main arm64 python3.10 arm64 3.10.12-1~22.04.3 [508 kB]
Get:5 http://mirrors.tuna.tsinghua.edu.cn/ubuntu-ports jammy-updates/main arm64 libpython3.10-stdlib arm64 3.10.12-1~22.04.3 [1845 kB]
Get:6 http://mirrors.tuna.tsinghua.edu.cn/ubuntu-ports jammy-updates/main arm64 python3.10-minimal arm64 3.10.12-1~22.04.3 [2242 kB]
Get:7 https://dl.modular.com/public/installer/deb/ubuntu jammy/main arm64 modular arm64 0.5.2 [50.0 MB]
Get:8 http://mirrors.tuna.tsinghua.edu.cn/ubuntu-ports jammy-updates/main arm64 libpython3.10-minimal arm64 3.10.12-1~22.04.3 [809 kB]
Get:9 http://mirrors.tuna.tsinghua.edu.cn/ubuntu-ports jammy-updates/universe arm64 python3-pip-whl all 22.0.2+dfsg-1ubuntu0.4 [1680 kB]
Get:10 http://mirrors.tuna.tsinghua.edu.cn/ubuntu-ports jammy-updates/universe arm64 python3-setuptools-whl all 59.6.0-1.2ubuntu0.22.04.1 [788 kB]
Get:11 http://mirrors.tuna.tsinghua.edu.cn/ubuntu-ports jammy-updates/universe arm64 python3.10-venv arm64 3.10.12-1~22.04.3 [5716 B]
Get:12 http://mirrors.tuna.tsinghua.edu.cn/ubuntu-ports jammy-updates/universe arm64 python3-venv arm64 3.10.6-1~22.04 [1038 B]
Fetched 64.9 MB in 14s (4601 kB/s)
debconf: delaying package configuration, since apt-utils is not installed
(Reading database ... 16626 files and directories currently installed.)
Preparing to unpack .../00-python3.10-dev_3.10.12-1~22.04.3_arm64.deb ...
Unpacking python3.10-dev (3.10.12-1~22.04.3) over (3.10.12-1~22.04.2) ...
dpkg: warning: symbolic link '/usr/bin/python3.10-config' size has changed from 38 to 35
dpkg: warning: symbolic link '/usr/share/man/man1/python3.10-config.1.gz' size has changed from 42 to 40
Preparing to unpack .../01-libpython3.10-dev_3.10.12-1~22.04.3_arm64.deb ...
Unpacking libpython3.10-dev:arm64 (3.10.12-1~22.04.3) over (3.10.12-1~22.04.2) ...
dpkg: warning: symbolic link '/usr/lib/aarch64-linux-gnu/libpython3.10.a' size has changed from 62 to 59
dpkg: warning: symbolic link '/usr/lib/aarch64-linux-gnu/libpython3.10.so' size has changed from 22 to 18
Preparing to unpack .../02-libpython3.10_3.10.12-1~22.04.3_arm64.deb ...
Unpacking libpython3.10:arm64 (3.10.12-1~22.04.3) over (3.10.12-1~22.04.2) ...
dpkg: warning: symbolic link '/usr/lib/aarch64-linux-gnu/libpython3.10.so.1' size has changed from 22 to 20
dpkg: warning: symbolic link '/usr/lib/python3.10/config-3.10-aarch64-linux-gnu/libpython3.10.so' size has changed from 46 to 42
Preparing to unpack .../03-python3.10_3.10.12-1~22.04.3_arm64.deb ...
Unpacking python3.10 (3.10.12-1~22.04.3) over (3.10.12-1~22.04.2) ...
dpkg: warning: symbolic link '/usr/bin/pdb3.10' size has changed from 26 to 24
dpkg: warning: symbolic link '/usr/share/doc/python3.10/changelog.Debian.gz' size has changed from 46 to 41
dpkg: warning: symbolic link '/usr/share/doc/python3.10/changelog.gz' size has changed from 18 to 7
Preparing to unpack .../04-libpython3.10-stdlib_3.10.12-1~22.04.3_arm64.deb ...
Unpacking libpython3.10-stdlib:arm64 (3.10.12-1~22.04.3) over (3.10.12-1~22.04.2) ...
dpkg: warning: symbolic link '/usr/lib/python3.10/_sysconfigdata__linux_aarch64-linux-gnu.py' size has changed from 38 to 36
Preparing to unpack .../05-python3.10-minimal_3.10.12-1~22.04.3_arm64.deb ...
Unpacking python3.10-minimal (3.10.12-1~22.04.3) over (3.10.12-1~22.04.2) ...
dpkg: warning: symbolic link '/usr/share/doc/python3.10-minimal/changelog.Debian.gz' size has changed from 46 to 44
Preparing to unpack .../06-libpython3.10-minimal_3.10.12-1~22.04.3_arm64.deb ...
Unpacking libpython3.10-minimal:arm64 (3.10.12-1~22.04.3) over (3.10.12-1~22.04.2) ...
dpkg: warning: symbolic link '/usr/lib/python3.10/sitecustomize.py' size has changed from 34 to 32
Selecting previously unselected package python3-pip-whl.
Preparing to unpack .../07-python3-pip-whl_22.0.2+dfsg-1ubuntu0.4_all.deb ...
Unpacking python3-pip-whl (22.0.2+dfsg-1ubuntu0.4) ...
Selecting previously unselected package python3-setuptools-whl.
Preparing to unpack .../08-python3-setuptools-whl_59.6.0-1.2ubuntu0.22.04.1_all.deb ...
Unpacking python3-setuptools-whl (59.6.0-1.2ubuntu0.22.04.1) ...
Selecting previously unselected package python3.10-venv.
Preparing to unpack .../09-python3.10-venv_3.10.12-1~22.04.3_arm64.deb ...
Unpacking python3.10-venv (3.10.12-1~22.04.3) ...
Selecting previously unselected package python3-venv.
Preparing to unpack .../10-python3-venv_3.10.6-1~22.04_arm64.deb ...
Unpacking python3-venv (3.10.6-1~22.04) ...
Preparing to unpack .../11-modular_0.5.2_arm64.deb ...
Unpacking modular (0.5.2) over (0.2.0) ...
Setting up python3-setuptools-whl (59.6.0-1.2ubuntu0.22.04.1) ...
Setting up python3-pip-whl (22.0.2+dfsg-1ubuntu0.4) ...
Setting up libpython3.10-minimal:arm64 (3.10.12-1~22.04.3) ...
Setting up python3.10-minimal (3.10.12-1~22.04.3) ...
Setting up libpython3.10-stdlib:arm64 (3.10.12-1~22.04.3) ...
Setting up libpython3.10:arm64 (3.10.12-1~22.04.3) ...
Setting up python3.10 (3.10.12-1~22.04.3) ...
Setting up libpython3.10-dev:arm64 (3.10.12-1~22.04.3) ...
Setting up python3.10-dev (3.10.12-1~22.04.3) ...
Setting up python3.10-venv (3.10.12-1~22.04.3) ...
Setting up python3-venv (3.10.6-1~22.04) ...
Setting up modular (0.5.2) ...
Processing triggers for libc-bin (2.35-0ubuntu3.1) ...
  __  __           _       _
 |  \/  | ___   __| |_   _| | __ _ _ __
 | |\/| |/ _ \ / _` | | | | |/ _` | '__|
 | |  | | (_) | (_| | |_| | | (_| | |
 |_|  |_|\___/ \__,_|\__,_|_|\__,_|_|

Welcome to the Modular CLI!

To get started, see:
https://modul.ar/get-started

For info about this tool, type "modular --help".
root@localhost:~# modular install mojo
# Found release for https://packages.modular.com/mojo @ 24.1.1-0ab415f7-release
# Downloading archive: packages/24.1.1-0ab415f7-release/mojo-aarch64-unknown-linux-gnu-24.1.1-0ab415f7-release.tar.gz
Done         [ ██████████████████████████████████████████████████████████████████████████████ ] 100%     126MiB/126MiB @  5.71MiB/s
# Extracting downloaded archives.
# Extraction complete, setting configs...
# Configs complete, running post-install hooks...
[mojo][error] Mojo SDK post-install test "`mojo repl`" failed:
SubprocessError: Command '/root/.modular/pkg/packages.modular.com_mojo/bin/mojo repl --one-line-before-file settings set target.load-cwd-lldbinit false --one-line-before-file settings set plugin.process.gdb-remote.packet-timeout 60' returned non-zero exit status 127.
  stderr:
    /root/.modular/pkg/packages.modular.com_mojo/bin/mojo-lldb: error while loading shared libraries: libedit.so.2: cannot open shared object file: No such file or directory
  File "/root/.modular/pkg/packages.modular.com_mojo/scripts/post-install/self-test.py", line 303, in test_mojo_repl
    raise SubprocessError(repl.returncode, " ".join(args), out, err)
[mojo][error] Some components of the Mojo SDK may have been installed successfully, but others may not work as expected.
[mojo][error] Please submit an issue to https://github.com/modularml/mojo and include the full output of the command you just ran.
modular: error: failed to run script
==========================
Failure Information:
        - Script: `PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin:/data/data/com.termux/files/usr/bin:/system/bin:/system/xbin HOME=/root PYTHONPATH=/root/.modular/pkg/packages.modular.com_mojo/venv/lib/root/.modular/pkg/packages.modular.com_mojo/venv/bin/python /root/.modular/pkg/packages.modular.com_mojo/scripts/post-install/self-test.py --modular-home /root/.modular --package-path /root/.modular/pkg/packages.modular.com_mojo --mojo-config-section mojo`
        - Result: 1
        - Stderr:
[mojo][error] Mojo SDK post-install test "`mojo repl`" failed:
SubprocessError: Command '/root/.modular/pkg/packages.modular.com_mojo/bin/mojo repl --one-line-before-file settings set target.load-cwd-lldbinit false --one-line-before-file settings set plugin.process.gdb-remote.packet-timeout 60' returned non-zero exit status 127.
  stderr:
    /root/.modular/pkg/packages.modular.com_mojo/bin/mojo-lldb: error while loading shared libraries: libedit.so.2: cannot open shared object file: No such file or directory
  File "/root/.modular/pkg/packages.modular.com_mojo/scripts/post-install/self-test.py", line 303, in test_mojo_repl
    raise SubprocessError(repl.returncode, " ".join(args), out, err)
[mojo][error] Some components of the Mojo SDK may have been installed successfully, but others may not work as expected.
[mojo][error] Please submit an issue to https://github.com/modularml/mojo and include the full output of the command you just ran.


==========================

[Benny-Nottonson]

Based on the output it looks like mojo-repl may not work as intended, but running the language locally may not pose an issue. It is not officially supported but i've seen many other distros that are not supported officially working fine.