Skip to content

Latest commit

 

History

History
56 lines (49 loc) · 1.33 KB

private_enclosure_management.md

File metadata and controls

56 lines (49 loc) · 1.33 KB

Configuring Management Interface On Server Node

  1. Modify interface configuration files on both nodes as under:
    srvnode-1: /etc/sysconfig/network-scripts/ifcfg-eno2

    TYPE=Ethernet
PROXY_METHOD=none
BROWSER_ONLY=no
BOOTPROTO=none
DEFROUTE=no
IPV4_FAILURE_FATAL=no
IPV6INIT=no
IPV6_DEFROUTE=no
IPV6_FAILURE_FATAL=no
IPV6_ADDR_GEN_MODE=stable-privacy
DEVICE=eno2
ONBOOT=yes
IPADDR=10.0.0.4
NETMASK=255.255.255.0

    srvnode-2: /etc/sysconfig/network-scripts/ifcfg-eno2

    TYPE=Ethernet
PROXY_METHOD=none
BROWSER_ONLY=no
BOOTPROTO=none
DEFROUTE=no
IPV4_FAILURE_FATAL=no
IPV6INIT=no
IPV6_DEFROUTE=no
IPV6_FAILURE_FATAL=no
IPV6_ADDR_GEN_MODE=stable-privacy
DEVICE=eno2
ONBOOT=yes
IPADDR=10.0.0.5
NETMASK=255.255.255.0

  2. Restart the 1GBps interface with direct cable connection to Enclosure ethernet port
    E.g. For eno1 one must run commands:

    ifdown eno-2  
ifup eno-2

  3. Verify the IP assignment with command:

    ip a

    Note: Look for the same network interface that was configured in #1

Configure Static IP On Storage Enclosure

Follow step #2 from guide: https://github.com/Seagate/cortx-prvsnr/wiki/In-band-Setup#RBOD-side