Your nano kit should contain all of the following products:
Note: If your personal computer only has USB-C connections then you will have to buy a USB to USB-C adapter.
| Number | Product | Details | Link |
|---|---|---|---|
| 1 | NVIDIA Jetson Nano | This is the node we will configure to run WES | https://www.amazon.com/NVIDIA-Jetson-Nano-Developer-945-13450-0000-100/dp/B084DSDDLT/ |
| 1 | Micro SD Card | The nano's operating system will be stored on the micro-SD | https://www.amazon.com/Silicon-Power-Nintendo-Switch-Compatible-microsdxc/dp/B091B2MX9S/ |
| 1 | USB to Ethernet Adapter | Allows the nano another ethernet connection | https://www.amazon.com/uni-Ethernet-Internet-Compatible-Notebook/dp/B087QFQW6F |
| 1 | USB Flash Drive | This USB stick will store data for WES | https://www.amazon.com/gp/product/B083ZS6ZR7 |
| 1 | Short Circuit Shunt (Jumper) | Connects the J48 header pins to enable DC power | https://www.amazon.com/Uxcell-a13112100ux0081-2-54mm-Standard-Circuit/dp/B00HR8DGZO/ |
| 1 | Linux WiFi Adapter (Antenna) | Adapter that allows the nano access to wifi | https://www.amazon.com/dp/B004AC0L4Y |
| 1 | Amcrest Camera | Camera configured with ansible playbook | https://www.amazon.com/Amcrest-5-Megapixel-NightVision-Weatherproof-IP5M-T1179EW-28MM/dp/B083G9KT4C/ |
| 1 | Sensor Extension Cable (5 Pin USB) | Cable to connect the environmental sensor to the nano | https://www.amazon.com/StarTech-USBINT5PIN-Internal-Motherboard-Header/dp/B003HHROBG |
| 1 | TPH Sensor (BME 680) | Environmental sensor configured after the ansible playbook | https://www.sparkfun.com/products/15743/ |
| 1 | USB 3 Hub | Powered USB Hub for adding additional sensors | https://www.amazon.com/dp/B07M91R8PN |
| Outdoor Ready Kit Parts | |||
| 1 | Outdoor Desktop Microphone | Outdoor microphone. Configuration instructions not yet added | https://www.surveillance-video.com/audio-ml1-ws-ip54.html |
| 1 | POE Splitter | - | - |
| 1 | DC DC Converter 12-5V | - | - |
| 1 | IP66 Box | - | - |
| 1 | Stevenson Shield | - | - |
| 1 | Back Plane | - | - |
| 1 | Substrate Plate | - | - |
| Desktop Ready Kit Parts | |||
| 1 | 5V 4A Power Supply Adapter | Power supply for the Jetson Nano | https://www.amazon.com/COOLM-Adapter-Converter-100V-240V-Switching/dp/B07RTWD725/?th=1 |
| 1 | USB/USB-C Card Reader | Adapter to flash Linux image onto micro-SD during bootstrap steps | https://www.amazon.com/UGREEN-Reader-Adapter-Portable-Windows/dp/B07D1J88CF/ |
| 1 | Micro-USB to USB cable | Cable to connect the nano to your personal computer | https://www.amazon.com/Micro-USB-to-Cable/dp/B004GETLY2 |
| 2 | Ethernet Cable | One is to connect the nano to the internet switch (e.g., router), and the other is to connect the camera to the nano | https://www.amazon.com/Ethernet-2000Mhz-Network-Weatherproof-Resistant/dp/B08D9FBLQG/ |
| 1 | Amcrest Camera Power | Powersupply for the Amcrest camera | https://www.amazon.com/100-240V-Adapter-Switching-Cameras-5-5mmx2-1mm/dp/B07GP1DX4N?th=1 |
| 1 | Indoor Desktop Microphone | Indoor microphone. Configuration instructions not yet added | https://www.amazon.com/Microphone-Condenser-Indicator-Gooseneck-Recording/dp/B07N2WRHMY/ |
Once you have all of these parts proceed to Bootstrap Steps