Skip to content

Commit

Permalink
Examples Customizations
Browse files Browse the repository at this point in the history
  • Loading branch information
@thinkyhead
thinkyhead committed Apr 12, 2020
1 parent 548c65f commit ee40ed9
Show file tree
Hide file tree
Showing 287 changed files with 12,174 additions and 11,871 deletions.
173 changes: 99 additions & 74 deletions config/examples/3DFabXYZ/Migbot/Configuration.h
View file

Large diffs are not rendered by default.

61 changes: 36 additions & 25 deletions config/examples/3DFabXYZ/Migbot/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -339,11 +339,11 @@
* The fan will turn on automatically whenever any stepper is enabled
* and turn off after a set period after all steppers are turned off.
*/
//#define USE_CONTROLLER_FAN
#define USE_CONTROLLER_FAN
#if ENABLED(USE_CONTROLLER_FAN)
//#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
#define CONTROLLER_FAN_PIN 7 // Set a custom pin for the controller fan
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
#define CONTROLLERFAN_SPEED 127 // 255 == full speed
//#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled
#endif

Expand Down Expand Up @@ -438,14 +438,14 @@
/**
* M355 Case Light on-off / brightness
*/
//#define CASE_LIGHT_ENABLE
#define CASE_LIGHT_ENABLE
#if ENABLED(CASE_LIGHT_ENABLE)
//#define CASE_LIGHT_PIN 4 // Override the default pin if needed
#define CASE_LIGHT_PIN 11 // Override the default pin if needed
#define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
#define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
#define CASE_LIGHT_DEFAULT_ON false // Set default power-up state on
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
//#define CASE_LIGHT_MAX_PWM 128 // Limit pwm
//#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu
#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu
//#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting.
//#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED.
#if ENABLED(CASE_LIGHT_USE_NEOPIXEL)
Expand Down Expand Up @@ -834,7 +834,7 @@
* vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the
* lowest stepping frequencies.
*/
//#define ADAPTIVE_STEP_SMOOTHING
#define ADAPTIVE_STEP_SMOOTHING

/**
* Custom Microstepping
Expand Down Expand Up @@ -915,8 +915,8 @@
// Change values more rapidly when the encoder is rotated faster
#define ENCODER_RATE_MULTIPLIER
#if ENABLED(ENCODER_RATE_MULTIPLIER)
#define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#define ENCODER_10X_STEPS_PER_SEC 75 // (steps/s) Encoder rate for 10x speed
#define ENCODER_100X_STEPS_PER_SEC 160 // (steps/s) Encoder rate for 100x speed
#endif

// Play a beep when the feedrate is changed from the Status Screen
Expand All @@ -929,7 +929,7 @@
#if HAS_LCD_MENU

// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
#define LCD_INFO_MENU
#if ENABLED(LCD_INFO_MENU)
//#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
#endif
Expand Down Expand Up @@ -957,7 +957,7 @@
#endif // HAS_LCD_MENU

// Scroll a longer status message into view
//#define STATUS_MESSAGE_SCROLLING
#define STATUS_MESSAGE_SCROLLING

// On the Info Screen, display XY with one decimal place when possible
//#define LCD_DECIMAL_SMALL_XY
Expand Down Expand Up @@ -1011,7 +1011,7 @@

//#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files

#define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27")
#define EVENT_GCODE_SD_STOP "G27" // G-code to run on Stop Print (e.g., "G28XY" or "G27")

/**
* Continue after Power-Loss (Creality3D)
Expand Down Expand Up @@ -1078,7 +1078,7 @@
//#define LONG_FILENAME_HOST_SUPPORT

// Enable this option to scroll long filenames in the SD card menu
//#define SCROLL_LONG_FILENAMES
#define SCROLL_LONG_FILENAMES

// Leave the heaters on after Stop Print (not recommended!)
//#define SD_ABORT_NO_COOLDOWN
Expand Down Expand Up @@ -1823,7 +1823,7 @@
* Requires NOZZLE_PARK_FEATURE.
* This feature is required for the default FILAMENT_RUNOUT_SCRIPT.
*/
//#define ADVANCED_PAUSE_FEATURE
#define ADVANCED_PAUSE_FEATURE
#if ENABLED(ADVANCED_PAUSE_FEATURE)
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
Expand Down Expand Up @@ -1864,7 +1864,7 @@
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change

//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#endif

Expand Down Expand Up @@ -2568,7 +2568,7 @@
* Add the M240 G-code to take a photo.
* The photo can be triggered by a digital pin or a physical movement.
*/
//#define PHOTO_GCODE
#define PHOTO_GCODE
#if ENABLED(PHOTO_GCODE)
// A position to move to (and raise Z) before taking the photo
//#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z)
Expand All @@ -2577,17 +2577,17 @@

// Canon RC-1 or homebrew digital camera trigger
// Data from: http://www.doc-diy.net/photo/rc-1_hacked/
//#define PHOTOGRAPH_PIN 23
//#define PHOTOGRAPH_PIN 12

// Canon Hack Development Kit
// http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
//#define CHDK_PIN 4
#define CHDK_PIN 12

// Optional second move with delay to trigger the camera shutter
//#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J)

// Duration to hold the switch or keep CHDK_PIN high
//#define PHOTO_SWITCH_MS 50 // (ms) (M240 D)
#define PHOTO_SWITCH_MS 50 // (ms) (M240 D)

/**
* PHOTO_PULSES_US may need adjustment depending on board and camera model.
Expand Down Expand Up @@ -2802,16 +2802,26 @@
/**
* User-defined menu items that execute custom GCode
*/
//#define CUSTOM_USER_MENUS
#define CUSTOM_USER_MENUS
#if ENABLED(CUSTOM_USER_MENUS)
//#define CUSTOM_USER_MENU_TITLE "Custom Commands"
#define USER_SCRIPT_DONE "M117 User Script Done"
#define CUSTOM_USER_MENU_TITLE "Tools"
#define USER_SCRIPT_DONE "M117 Done"
#define USER_SCRIPT_AUDIBLE_FEEDBACK
//#define USER_SCRIPT_RETURN // Return to status screen after a script

#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_1 "Probe Mesh&Save"
#define USER_GCODE_1 "G28\nG29 P1\nG29 P3 T0\nG29 S0 A F10\nG29 J2\nM500"

#define USER_DESC_2 "Manual Mesh&Save"
#define USER_GCODE_2 "G28\nG29 P4 R999 T\nG29 S0 A F10\nM500"

#define USER_DESC_3 "Print Test Pattern"
#define USER_GCODE_3 "G26 C P O2.25" //Do a typical test sequence

#define USER_DESC_4 "Move Bed Forward"
#define USER_GCODE_4 "G28 X0 Y0\nG1 X0 Y180 F3000\nM84" //move X/Y to min endstops & Feed the bed forward & steppers off

/*
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
Expand All @@ -2823,6 +2833,7 @@
#define USER_DESC_5 "Home & Info"
#define USER_GCODE_5 "G28\nM503"
*/
#endif

/**
Expand Down
Loading

0 comments on commit ee40ed9

Please sign in to comment.