Marlin 2.1.1 Example Configurations

Example Configurations for many (not all) machines supported by Marlin 2.1.1.

Full Changelog: d70b0f2...e4feff5

Removed

• 🔥 Drop support for L64XX (c990b86)

New Options

• ✨ Foam Cutter by rcKeith (#751)
• ✨ MAX7219 profiler option (b134633)
• ✨ Support Biqu SE BX board V3.0 (#774)
• ✨ Inline Laser (fc9c61f)
• ✨ EMOTION_TECH_LCD (69bad39)
• ✨ MAG_MOUNTED_PROBE (a98a646)
• ✨ Steinhart-Hart C Coeff for Custom Thermistor (53cc251)
• 🔧 Rotational / Angular Feedrate (2dc50a8)
• ✨ DISABLE_DUE_SD_MMC (13cedb5)
• ✨ ENCODER_NOISE_FILTER (766f018)
• ✨ SWITCHING_NOZZLE_SERVO_DWELL (c0e4a07)
• 🧑‍💻 MARLIN_TEST_BUILD (943c43a)
• ✨ BD_SENSOR - Bed Distance Sensor (e6a61ac)
• ✨ SD_ABORT_ON_ENDSTOP_HIT_GCODE (8549580)
• 🔧 CONFIG_EXPORT (a450b55)

New Configurations

• ✨ Velleman Vertex Delta K8800 (7b2a876, 8833933)
• ✨ Sapphire Plus 2.1 (#741)
• ✨ CR-10 S5 with BTT SKR E3 mini V3 (#780)
• ✨ Teensy 3.5-6 Simple / LulzBot Mini2 Hibiscus / Experimental (#752)
• ✨ Ender-5 Pro 4.22 w/ Micro-Swiss Direct Drive, BLTouch (#759)
• ✨ Ultimaker 2+ (#791)

Fixed

• ✏️ Fix Ender-6 BLTouch Option (#749)
• 🔖 Update branch warning (c27da0b)
• 🐛 Fix Biqu BX Serial Ports (#760)
• 🩹 Fix RAMPS / 5 Linear Axes (#784)
• 🩹 No custom BS with MKS_TS35_V2_0 (17cbbaa)
• 🐛 Fix Ender-3 Max Z/E Drivers (#789)
• 🩹 Fix Microswiss Direct Drive Steps/mm (#790)
• 🐛 Velleman K8400 has DRV8825 (#793)

Improved

• 🚸 Improve Sovol SV01 / SKR Mini E3 V3 (#748)
• ⚡️ Improve Biqu BX (#763)
• 🧑‍💻 Update simulator configuration (632a50d)
• 🔧 Update Prusa MK3/S Configs (#777)
• 🚸 Improve B1 SE Plus Config (#779)
• 🔧 Creality3D Boot / Status bitmaps (#782)
• 🚸 Machine-relative Z_STEPPER_ALIGN_XY (47531dd)
• ⚡️ Reduce Chiron acceleration (#788)
• 🔧 Fix, Improve Biqu BX Config (#786)
• 🚸 Relax "heating failed" for hotends (da98d91)

Changed

• 📝 Index Rev03 => LumenPnP (#766)
• 📝 Ender 3 S1 - STM32F1 vs STM32F4, and DACAI info (#765)
• 📝 Put DELTA / SCARA / TPARA in all configs (#776)
• 📝 Update BX Readme (#775)
• 📝 Update MPCTEMP G-Code M306 T (#787)
• 📝 Add sections for schema (48ffab7)
• 🎨 Add temp sensor conditions (2e46fc8)

Marlin 2.1 Example Configurations

Changes since 2.0.9.4…

New Examples

• ✨ Sovol SV01 / SKR Mini E3 V3 (#745)

Updated Examples

• 🐛 Fix Anycubic i3 Mega (#734)
• 🐛 Fix Elegoo Neptune 2 max temps (#729)
• 🚸 Improve Ender5 Plus (#739)
• 🐛 Use serial port 2 for Ender 5 Plus LCD (#744)

New Features

• ✨ Up to 9 linear/rotary axes
• ✨ MPCTEMP - Model Predictive Temperature Control

Changes

• 🔧 Base NUM_AXES on defined *_DRIVER_TYPEs
• 🐛 Fix various build issues (#737)

Marlin 2.0.9.5 Example Configurations

Example Configurations for many (not all) machines supported by Marlin 2.0.9.5.

Full Changelog: 2.0.9.4...2.0.9.5

• 🔖 Configurations updated to Version 2.0.9.5
• 🐛 Fix Biqu BX Serial Ports (#760)
• 📝 Index Rev03 => LumenPnP (#766)
• ✨ Inline laser
• 📝 ESP32 comments
• 🐛 Fix various build issues (#737)
• 📝 Put DELTA / SCARA / TPARA in all configs (#776)
• 🐛 Fix stepper drivers in default
• 🔧 Improve config parity with 2.1.x
• 💥 Num Axes / Multi-Stepper based on Driver Types
• 📝 Remove AXISn_ROTATES comments
• 🩹 No custom BS with MKS_TS35_V2_0
• 🔧 Fix, Improve Biqu BX Config (#786)
• 📝 Update MPCTEMP G-Code M306 T (#787)
• ⚡️ Reduce Chiron acceleration (#788)
• 🐛 Fix Ender-3 Max Z/E Drivers (#789)
• 🩹 Fix Microswiss Direct Drive Steps/mm (#790)

Marlin 2.0.9.4 Example Configurations

This release brings lots of new features and major changes to Marlin.

Full Changelog: 2.0.9.3...2.0.9.4

New Examples

• ✨ Ender-3 Pro with SKR Mini E3 V3 (#660)
• ✨ Tevo Little Monster
• ✨ CTC Bizer (#676)
• ✨ Ender 3 S1 (#677)
• ✨ Weedo TINA2 (#685)
• ✨ Ender-3 with FYSETC Cheetah 2.0 (#683)
• ✨ Creality CR-10S with SKR 2.0 (#693)
• ✨ BIQU Thunder (#694)
• ✨ Ender-3 with BTT SKR Mini E3 v3

New Features

• 🔧 LED_POWEROFF_TIMEOUT
• 🔧 PROBE_OFFSET_WIZARD for LVGL
• ✨ USE_MARLIN_DISKIO_FOR_HOST_DRIVE
• ✨ HOST_STATUS_NOTIFICATIONS
• ♻️ NOZZLE_PARK_MOVE
• ✨ Temp sensors 503-505
• ✨ Thermistor 68
• ✨ LCD_BACKLIGHT_TIMEOUT
• ✨ MULTI_VOLUME M21 P / S / U
• 🚸 Universal X_AXIS_TWIST_COMPENSATION
• ✨ Ender-3 V2 / S1 screen cross-compatibility (#687)
• ✨ STATUS_MESSAGE_TIMEOUT_SEC
• ✨ FREEZE_STATE
• ✨ Zonestar P802QR2 (SKR 1.4 Turbo / TMC2209) (#703)
• ✨ Graphical Display Sleep
• ✨ AUTO_REPORT_REDUNDANT option
• ✨ SOUND_ON_DEFAULT
• ✨ LASER_SAFETY_TIMEOUT_MS
• ✨ MPCTEMP - Model Predictive Temperature Control

Updated Examples

• 🔧 Update Index REV03 config (#672)
• 🔥 Remove Bad Ender-5 Config (#675)
• 🚸 Improve Zonestar P802QR2 (#679)
• 🩹 Enable Ultimaker Original+ hotend autofan (#686)
• 🐛 Anycubic Chiron needs FAN_SOFT_PWM (#695)
• ⚡️ Index Rev03 SPI stepper support (#697)
• ⚡️ Improve SKR Mini E3 endstops / BLTouch (#700)
• 🩹 No pulldowns on CR-10 V3 (#706)
• 🐛 Fix Anycubic i3, i3 Mega
• 🐛 Fix Index CNC Rev3 J axis micro-steps (#712)
• 🔧 Enable Sunlu S8 Auto Fan (#718)
• 🔧 CR-10S stock board has onboard SD (#716)
• 🐛 No ADAPTIVE_STEP_SMOOTHING on Ender-3 V2 (SKR Mini E3 V3) (#727)
• 🚸 Fix, improve Elegoo Neptune 2 (#721)
• 🚸 Improve B1, Set MULTI_VOLUME for B1 SE Plus (#719)
• 🐛 Define required axis drivers (#726)
• 🐛 Fix dual MAX31865 init
• 🔧 Configuration updates, cleanup (#709)
• 🐛 Fix TINA2 motherboard (#731)
• 🐛 Fix Dagoma M106 num fans (#728)
• ✨ Add K8200 upgraded Z axis, RRD FG LCD (#730)

Changes

• 🧑‍💻 HAS_MARLINUI_MENU and HAS_MANUAL_MOVE_MENU
• 🎨 Move LED_CONTROL_MENU
• 🎨 Move PROPORTIONAL_FONT_RATIO
• 🚸 Use Z_STEPPER_ALIGN_STEPPER_XY to enable
• 🔧 Mark Thermal Variance Monitor EXPERIMENTAL
• 🚸 Default TMC address defined by board (#696)
• 🔧 DWIN_CREALITY_LCD_ENHANCED => DWIN_LCD_PROUI
• 🚸 More PID Edit menus
• 🚸 Alert users to avoid import-2.0.x
• 🔧 Move LASER_COOLANT_FLOW_METER to LASER_FEATURE
• 🔥 Not using RRF_GCODE_DIALECT
• 💥 Multi-stepper updates
• 🔧 LEVEL_BED_CORNERS => LCD_BED_TRAMMING
• 🔧 Axes based on defined driver types
• 🔧 Auto-assign LCD_SERIAL_PORT with warning
• FAN_INVERTING => FAN_ACTIVE_STATE (LOW)

Cleanup

• 📝 Update TOOLCHANGE_FILAMENT_SWAP comments
• 📝 (secs) => (s)
• 📝 Fix X2_MAX_POS comment
• 📝 Fix DEFAULT_DUAL_X_CARRIAGE_MODE comment
• 📝 Adjust XATC comment
• 📝 Update Spindle/Laser docs link
• 📝 ESP32 Hardware PWM
• 📝 Obsolete "freeze" comment
• 📄 Move MKS Robin E3 V1.1 Readme (#705)
• 📄 Adjust DGUS Touch Display comment
• ✏️ No such pin as COOLER_FAN_PIN
• 🎨 Tweak NEOPIXEL_LED formatting
• 📝 Fix some README formatting (#714)
• 📝 Update NEOPIXEL_TYPE comment
• 📝 Refer to 'PROGMEM' as 'flash'
• ✏️ gcode => G-code

Marlin 2.0.9.3 Example Configurations

New Examples

• ✨ Kingroon KP3S (#637)
• ✨ Elegoo Neptune 2 (#636)
• ✨ Creality3D Ender 2 Pro (#633)
• ✨ EasyThreeD ET4000+ (#623)
• ✨ BTT_MINI_12864_V1 (d463235)
• ✨ Biqu B1 with BTT SKR 2 (#605)
• ✨ Biqu BX (TFT_COLOR_UI) (#604)
• ✨ BIQU B1 SE Plus (8dda751, #613, #614)
• ✨ Artillery Sidewinder X2, Hornet, Genius (BLTouch) (#597)
• ✨ E3V2 with SKR E3 Turbo (#600)
• ✨ Ultimaker 2 (experimental) (#587)
• ✨ BTT SKR Mini E3 V3.0 (2e61255)

Updated Examples

• 🔧 Tuned UMO configurations (#631)
• 🐛 Native USB on E3V2 SKR E3 Turbo (#621)
• 🐛 Biqu B1 (SKR2) - Disable Print Counter (#617)
• 🔧 Biqu BX - Allow Low E Jerk (#616)
• 🐛 Fix Flashforge Creator Pro auto fans (#609)
• 🚸 Fix and improve Prusa MK3 configs (#607)
• 🎨 Adjust Ender-3 V2 DWIN options (33b8f00)
• 🔧 Fix EZBoard V2 board name (87ab00a)
• 🚸 CR-20 BABYSTEP_ZPROBE_OFFSET (#592)
• 🐛 Disable BLTOUCH_SET_5V_MODE on Ender 3 (Max) Creality v4 (#583)

New Features

• ✨ EEPROM_INIT_NOW (4d0376b)
• ✨ Extended MAX31865 options (9edd385)
• ✨ CONFIGURATION_EMBEDDING (dbd3991)
• ✨ CHAMBER_FAN_INDEX (fbf9a91)
• ✨ X_AXIS_TWIST_COMPENSATION (2b2ed67)
• ✨ EASYTHREED_UI (897f408)
• ✨ MARKFORGED_YX (1787e14)
• ✨ Fan tachometer support (1a30fbd)
• ✨ PROBE_ENABLE_DISABLE (a0eb0e3)
• ✨ CNC_DRILLING_CYCLE (d6a5d9a)
• ✨ OPTIBOOT_RESET_REASON (073db3b)
• ✨ Add ALLOW_LOW_EJERK option (29f1f5c)
• ✨ HOST_SHUTDOWN_MENU_ITEM (c9578df)
• 🔧 Options for USE_TEMP_EXT_COMPENSATION (53b8710)
• ✨ EVENT_GCODE_TOOLCHANGE_ALWAYS_RUN (ff76e03)
• ✨ Add BTT_TFT35_SPI_V1_0 (1ddf4c3)

Other Changes

• 🚸 Per-axis TMC Hold Multiplier (7fdcd20)
• 🚸 Move MOTHERBOARD closer to the top (97ceb85, cc63bec)
• 🚸 Adjust FAST_PWM_FAN (a24a1d7)
• 📝 BLTOUCH_HS_MODE comments (1805bb3)
• 🍻 Remove Bidirectional Unicode Text (#620)
• 🔧 SOUND_MENU_ITEM for E3V2 (9665502)
• 🚸 Expose sub-options for E3V2 Enhanced (a151d5e)
• 🔧 Restore Low EJERK Configs (#606)
• ✏️ Fix links in README (#612)
• 🔧 BLTOUCH_HS_MODE is true/false (50b531b)
• 🎨 Refactor Probe Temp Compensation (b62e73a)
• 📝 Add links to README (13e350e)
• 📝 Comment on AUTOTEMP_OLDWEIGHT (b17fbdf)
• 🐛 Remove extra MANUAL_SOLENOID_CONTROL (f2e8ecc)
• 🎨 Use CAN_SHOW_REMAINING_TIME conditional (7a11f71)
• 🔧 Remove STM32F203RE example warnings (fdf0300)
• 🔨 Move Creality 4.2.2 warning (729ab2b)

Repository

• 🚸 Reject PRs with a bad target (131c45e)
• 🚚 chmod 644 (f3d25bf)

Marlin 2.0.9.2 Example Configurations

New Features

• ✨ Tronxy X5SA-500-2E (#545)
• ✨ MAX Thermocouple options (f0510d0)
• ✨ MKS_MINI_12864_V3 (b8f8bce)
• ✨ Board Thermistor (1f38de7)
• ✨ MarlinUI for Ender 3 V2 (3fe1eb3, 2a9857d, 6ea6e8f)
• ✨ Unified DWIN_SET (b967333)
• ✨ CR-10 S5 + BTT SKR Mini E3 1.2 + TFT35 E3 V3.0 (#532)
• ✨ Add TDK NTCG104LH104KT1 NTC100K Thermistor (#541)
• ✨ BUFFER_MONITORING (6a43c22)
• 🔧 Enable MANUAL_FEEDRATE for DWIN_CREALITY_LCD (cbaa7ca)
• ✨ HOST_PAUSE_M76 (0ed33bd)
• 🔧 Enable SCROLL_LONG_FILENAMES for E3V2 (0d57303)
• ✨ Simulator Configuration (77cb5ed)
• ✨ MIXING_PRESETS (cf28abe)
• ✨ MKS_PWC (ec522d0)
• ✨ Ender-3 with TH3D EZBoard Lite V2 (0c7b314)
• ✨ Creality CR-30 PrintMill (3afe7cd)
• ✨ Sovol SV-01 with BTT E3 Turbo (#540)
• 📺 Add TFT_RES_1024x600 (992c1ea)
• ✨ INDIVIDUAL_AXIS_HOMING_SUBMENU (a825904)
• ✨ Index Pick-and-Place (f8e2d40)
• ✨ DGUS_LCD_UI_RELOADED (a4093de, 76712a6)
• ✨ DWIN_CREALITY_LCD_JYERSUI (27d6e8d)
• ✨ DWIN_CREALITY_LCD_ENHANCED (0c08417)
• ✨ TOUCH_IDLE_SLEEP (87c1e6c)
• ✨ SERVO_DETACH_GCODE (a548dae)
• ✨ New filament change options (14b0948)
• ✨ Polargraph plotter (84aa5fe)
• ✨ FlyingBear P902 (#569)
• ✨ CR-10 S5 board V2.2 (with BLTouch) (#574)
• ✨ WYH_L12864 display for Alfawise (1167dba)
• ✨ Add IJK home positions (86585c5)

Other Changes

• 📝 Update Z_SAFE_HOMING description (6777861)
• Update Thermistor comments (1f40060)
• E3V2 DWIN_SET font restore (3d52342)
• 🔧 Fix endstop inverting with BLTouch options (#533)
• 🐛 Fix Ender-3 + MKS Robin E3 V1.1 reversed steppers (#538)
• 🚸 Fix Tevo Tornado boot screen (#539)
• 📝 Update status comment (0981763)
• 📝 More details for DGUS LCDs (2da6882)
• 🐛 Patch config issues (#548)
• 📝 Update Ender 5/6 READMEs (#547)
• 📝 Spellcheck (354f671)
• 🔧 DEFAULT_EJERK >= 10 for Linear Advance (e59d773)
• 🔧 Improve Creality CR-10 V3 (#550)
• 🐛 Fix Mixing Extruder examples (fec1a62)
• 🚸 Updated DWIN_SET English text (9f12023)
• 💡 AdaFruit => Adafruit (5e8688a)
• 🔧 Bring configs up to date (6f1ce9a)
• 📝 AlephObjects => LulzBot (c8c3b90, 6597a43)
• 🔧 Better SH for E3 Pro + SKR 1.4 Turbo (f6c3ba6)
• 🚸 G2/G3 Arcs Rework (5941b1f)
• ⚡️ Improve Geeetech A20 endstop reliability (#559)
• 📝 Update PID_PARAMS_PER_HOTEND comment (7d9bf17)
• 🩹 Update Index arc settings (9af88ec)
• SPINDLE_LASER_PWM => SPINDLE_LASER_USE_PWM (305d84b)
• 🔖 Configurations version 02000902 (1a6b57b)
• 🌐 Update Greek language options (c7c1e96)
• 📝 Clarify SD card formatting (#571)
• 🚸 Fix CR-10 Mini + SKR Mini E3 V2 bitmaps (#570)
• 🔧 CR-10 V3: Disable BLTouch by default (#567)
• 🔧 Update Longer3D / U20 examples (#558)
• 🔧 Tuned Ultimaker Original Plus UMO+ (#553)
• 📝 Clean up Delta headings (8c79cb8)
• 🐛 Disable BLTouch 5V Mode for BTT SKR Mini E3 V2 (#576)
• 🔧 Improve Thinker SE and V2 (#577)
• 🎨 Rearrange pullups/pulldowns (256a11c)

Marlin 2.0.9.1 Example Configurations

• Add RAMPS with 5 linear axes (no extruders) configuration example.
• Add CTC A13 (Ender-3 clone) example configurations.
• Add PROBING_ESTEPPERS_OFF option to only disable E during probing.

Marlin 2.0.9 Example Configurations

• Add Ultimaker Original Plus example configuration.
• Support up to 6 linear axes (and still, up to 8 extruders).
• Add TEMP_SENSOR_REDUNDANT with the full suite of temp sensor options.
• Add REDUNDANT_PART_COOLING_FAN.
• Add E_DUAL_STEPPER_DRIVERS and options.
• Add a default SENSORLESS_BACKOFF_MM for Z with a value of 0.
• Add EVENT_GCODE_TOOLCHANGE_T# options.
• Add I2C_AMMETER and options.

Marlin 2.0.8.2 Example Configurations

New Features

• ✨ MEDIA_MENU_AT_TOP moves "Print from SD" to the top of the Main Menu. If using a keypad, set it to 0 or false to move it to the bottom.
• ✨ BAUDRATE_2 and BAUDRATE_3 are used to set the baud rate for SERIAL_PORT_2 and SERIAL_PORT_3.
• ✨ Add NEOPIXEL_BKGD_INDEX_(FIRST|LAST) so "background" LEDs can encompass a range of neopixels. (MarlinFirmware/Marlin#21962)

New Configurations

• 🔧 Wanhao Duplicator i3 Plus (#489)
• 🔧 Ender 3 with SKR 1.4, BLTOUCH, TMC2208
• 🔧 Malyan M180 (#503)

Changes

• 🔧 Comment out NEOPIXEL_PIN by default
• 🔧 Update Animated Bootscreen example (#504)

Marlin 2.0.8.1 Example Configurations

Changelog

Configuration.h

• Support a third serial port - SERIAL_PORT_3 (MarlinFirmware/Marlin#21784)
• Add UBL_MESH_WIZARD (MarlinFirmware/Marlin#21556, MarlinFirmware/Marlin#21791)
• Split up MKS_LCD12864 into MKS_LCD12864A and MKS_LCD12864B

Configuration_adv.h

• Update Advanced Pause description (MarlinFirmware/Marlin#21829)
• Add Laser Cutter Air Assist - AIR_ASSIST (MarlinFirmware/Marlin#21753)
• Add M154 S Position Auto-Report - AUTO_REPORT_POSITION (MarlinFirmware/Marlin#18427)
• Instant Freeze/Resume Function - FREEZE_FEATURE (MarlinFirmware/Marlin#17462)