Marlin 2.0.8 Example Configurations

Changelog

Configuration.h

• Ethernet Serial Port
• New Multi-Material options, adding SMUFF
• G-code script on PSU On/Off
• Chamber PID and cooling options
• Resistances for MAX31865 on TEMP_SENSOR_0 / 1
• Configurable Thermal Overshoot
• Formal TMC2225/6 support
• Default Z steps-per-mm : 400
• Removed nonexistent probe
• Extended Nozzle-to-Probe offsets description
• Some options replace SPEED with FEEDRATE
• Probe Tare and Activation Switch
• Quiet Probing — option to keep the hotend heated for a
  quicker start after G29 and prevent cold extrusion error
• Preheat Before Probing option
• Z Idle Height replaces No-Raise-on-Unknown-Z
• Extended filament runout sensor notes
• Option to watch all filament sensors
• Individual Filament Runout Sensor configurations
• Option to always enable leveling after G28
• Preheat Before Leveling option
• Apply MANUAL_PROBE_START_Z to all manual probing
• Default Leveling Fade Height option
• G26 Travel Feedrate
• Unified Bed Leveling can use Hilbert Curve for faster probing
• Option to use the Probe for Bed Tramming
• Much-improved TFT configuration
• More TFT controllers
• Renamed touch calibration options
• Keep a Neopixel backlight on when setting others

Configuration_adv.h

• Chamber Fan Mode 3 (Linear Increase, always-on)
• Laser Cooling Temp Sensor
• Laser Coolant Pump / Flow Meter
• Cooler Thermal Protection (M143/M193)
• Cooler Auto-Fan
• Option to use RGB / RGBW LED as case light
• Z2-Z4 Direction Inverting (relative to Z)
• G-code Script after IDEX Mode Change
• Home Z First option
• Assisted Manual Tramming Wizard and Wait Position
• Z Idle Height replaces Z After Deactivate and Home After Deactivate
• Backlash Compensation for CoreXY / XZ / YZ
• SHORT_MANUAL_Z_MOVE => FINE_MANUAL_Z_MOVE
• PROBE_OFFSET_START => PROBE_OFFSET_WIZARD_START_Z
• Probe Offset Wizard XY Position
• "Sound On/Off" menu item option
• Preheat shortcut (in the main menu) option
• Option to report Tramming deviation
• SD Card SPI Speed
• Option to ignore (don't mount) the SD Card at startup
• Option to open file browser on media insert
• G-Code M808 Repeat Markers feature
• Specify Pull-up or -down for Power-Loss pin
• Option to home Z (at a safe position) on Power-Loss Recovery
• Option to enable/disable UTF-8 to the display
• Native USB Host Flash Drive options
• Option to ignore the SD Detect Pin
• Multi-Volume feature
• Cooler / Flowmeter LCD display options
• Anycubic Chiron LCD options
• More Touch UI FTDI EVE models
• UTF8 Cyrillic for Touch UI
• Optimized Mesh storage option
• Serial Receive Buffer Monitor
• Realtime Reporting Commands feature (S000, P000, R000)
• Tool Sensor for tool-changing
• Improved TMC and L64xx stepper driver defaults
• Added TMC Axis Interpolation option
• Serial slave addresses disabled by default
• Per-axis Chopper Timing options
• Air Evacuation feature
• Spindle Servo feature
• Servo-oriented Power scaling option
• Laser Test Pulse Min/Max Duration settings
• Disable LASER_POWER_INLINE by default
• Synchronous Laser Control with M106/M107
• Power Monitor Voltage cleanup
• Option to disable Stepper Driver Reverse Protection
• MeatPack G-code Compression feature
• Custom Menus for both Main and Configuration
• Custom User Buttons feature
• Cancel Object Reporting option
• G34 Mechanical Gantry Calibration (replacing TMC_Z_CALIBRATION)
• Ethernet MAC Address setting
• MMU V1 and V2 options
• MMU2-S now set by PRUSA_MMU2_S_MODE feature
• Moved MMU Extruder Sensor feature
• Postmortem Debugging feature
• Soft Reset via KILL or ^X serial commands
• Soft Reset on Kill (after Click) option

Marlin 2.0.7.2 Example Configurations

Fix Ender-5 Plus

Marlin 2.0.7.1 Example Configurations

Examples Extras

Marlin 2.0.7 Example Configurations

Examples Extras

Marlin 2.0.6.1 Example Configurations

Examples Extras

Marlin 2.0.6 Example Configurations

Update REPRAPWORLD_KEYPAD link

Marlin 2.0.5 Example Configurations

Fix CR-20 / Pro runout pin & contrast

Marlin 2.0.4 Example Configurations

Examples Extras

Marlin 2.0.3 Example Configurations

Examples Extras

Marlin 2.0.2 Example Configurations

Examples Extras