Voron_2.4

This is a Voron 2.4r2 build. This is a work in progress and here I am documenting the journey, hardware, software, misc.

Sections include:

• PI ** boot startup ** PWM settings ** camera settings ** dt-blob.bin file

• Klipper script for auto MCU builds on version changes

• Theme files

• VOC (Volatile Organic Chemical) sensor usage.

Hardware:

• Platform: Formbot 350mm Kit
• Moons' motors NS17HD6P420I-04 1.8deg
• Rapido UFH plus hotend
• TMC2209 stepper drivers
• Printed parts from West3d
  • Updated Mod for Stealthburner for Rapido UFH
• Octopus 1.1 board, STM32F446
• vivedino rails with Mobilux NGLI-1 lube
• Vivendio bed heater, 110v 650W NTC100K b3950
• Upgraded heatsink on TMC drivers, 10x10x13mm
• USB 3.0 Keystone Jack Insert to PI
• Cat 5 ethernet keystone Jack Insert to PI
• Pi hardware - test setup:
  • Pi CM4 4GB RAM, 16GB eMMC, 2.4/5.0GHz Wi-Fi & Bluetooth 5.0 (CM4104016)
  • Oratec TOFU carrier board
  • geekpi cm4 heatsink w/ fan
• Pi hardware - printer:
  • Pi4 8g
• BTT PITFT50 V2.0 5inch LCD touchscreen
• TP-link Smart Strip for:
  • Printer
  • Filament Dryer,
  • Heated bed (coming soon)
• Noctua NF-A6x25 FLX, 2x case fan and 1x exhaust, silent and variable speed.
• TAP - was Euclid probe in place of the inductive probe - https://github.com/VoronDesign/Voron-Tap
• LED effects for use with StealthBurner
• Kiauh g-code shell extension
• BTT filament runout sensor
• Klipper Expander board - for case lights
• Rasberry Pico for resonance testing, usb portable
• Nevermore with 2x 5015 fans.

Software Used:

• OS: Raspberry Pi ARM64, based on Debian bullseye.
• kiauh https://git.io/JnmlX for base install of Klipper / Moonraker / Mainsail / KlipperScreen
• timelapse for timelapse videos
• Tailscale for VPN
• GitHub for backup/sharing
• Crowsnest for webcam
• Auto_Z for z offset. https://github.com/protoloft/klipper_z_calibration
• Mobileraker companion https://github.com/Clon1998/mobileraker_companion

:install:

• install/setup kiauh = https://github.com/th33xitus/kiauh
  • install klipper
  • install moonraker
  • install mainsail
  • install klipperscreen
  • install gcode shell command
  • install theme - Mainsail x Voron Toolhead
  • install Mobileraker companion - for notifications
  • install moonraker timelapse = https://github.com/mainsail-crew/moonraker-timelapse
  • install led effects = https://github.com/julianschill/klipper-led_effect
  • install Klipper host MCU = https://www.klipper3d.org/RPi_microcontroller.html
  • install Crowsnest for camera = https://github.com/mainsail-crew/crowsnest
  • install Tailscale for remove VPN = https://tailscale.com/

:TODO:

replace euclid with TAP

runout sensor

input shaping

HD camera mount