sockname and peername access from hackney module (#504)

* add sockname and peername methods to the hackney module.

* improve example

* sockname and peername helper info APIs

README.md

@@ -100,9 +100,9 @@ $ ./rebar3 shell
 It is suggested that you install rebar3 user-wide as described [here](http://blog.erlware.org/rebar3-features-part-1-local-install-and-upgrade/).
 This fixes zsh (and maybe other shells) escript-related bugs. Also this should speed things up.
 
-```erlang-repl
+```erlang
 
-1>> application:ensure_all_started(hackney).
+> application:ensure_all_started(hackney).
 ok
 ```
 
@@ -149,7 +149,7 @@ where `Method`, can be any HTTP method in lowercase.
 ### Read the body
 
 ```erlang
-{ok, Body} = hackney:body(Client).
+{ok, Body} = hackney:body(ClientRef).
 ```
 
 `hackney:body/1` fetch the body. To fetch it by chunk you can use the
@@ -158,7 +158,7 @@ where `Method`, can be any HTTP method in lowercase.
 ```erlang
 
 read_body(MaxLength, Ref, Acc) when MaxLength > byte_size(Acc) ->
-	case stream_body(Ref) of
+	case hackney:stream_body(Ref) of
 		{ok, Data} ->
 			read_body(MaxLength, Ref, << Acc/binary, Data/binary >>);
 		done ->
@@ -186,30 +186,39 @@ couple of requests.
 
 ```erlang
 
-Transport = hackney_tcp,
-Host = << "https://friendpaste.com" >>,
+Transport = hackney_ssl,
+Host = << "friendpaste.com" >>,
 Port = 443,
 Options = [],
-{ok, ConnRef} = hackney:connect(Transport, Host, Port, Options)
+{ok, ConnRef} = hackney:connect(Transport, Host, Port, Options).
 ```
 
 > To create a connection that will use an HTTP proxy use
 > `hackney_http_proxy:connect_proxy/5` instead.
 
+
+#### To get local and remote ip and port information of a connection:
+
+```erlang
+
+> hackney:peername(ConnRef).
+> hackney:sockname(ConnRef).
+```
+
 #### Make a request
 
 Once you created a connection use the `hackney:send_request/2` function
 to make a request:
 
 ```erlang
 
-ReqBody = << "{	\"snippet\": \"some snippet\" }" >>,
+ReqBody = << "{\"snippet\": \"some snippet\"}" >>,
 ReqHeaders = [{<<"Content-Type">>, <<"application/json">>}],
 NextPath = <<"/">>,
 NextMethod = post,
-NextReq = {NextMethod, NextPath, ReqHeaders, ReqBody}
+NextReq = {NextMethod, NextPath, ReqHeaders, ReqBody},
 {ok, _, _, ConnRef} = hackney:send_request(ConnRef, NextReq).
-{ok, Body1} = hackney:body(ConnRef),
+{ok, Body1} = hackney:body(ConnRef).
 ```
 
 Here we are posting a JSON payload to '/' on the friendpaste service to

THANKS

@@ -30,3 +30,4 @@ Mayorov Andrey <[email protected]>
 omarkj <[email protected]>
 Pavel Abalihin <[email protected]>
 Ilya Khaprov <[email protected]>
+Bikram Chatterjee <[email protected]>

doc/README.md

@@ -100,9 +100,9 @@ $ ./rebar3 shell
 It is suggested that you install rebar3 user-wide as described [here](http://blog.erlware.org/rebar3-features-part-1-local-install-and-upgrade/).
 This fixes zsh (and maybe other shells) escript-related bugs. Also this should speed things up.
 
-```erlang-repl
+```erlang
 
-1>> application:ensure_all_started(hackney).
+> application:ensure_all_started(hackney).
 ok
 ```
 
@@ -149,7 +149,7 @@ where `Method`, can be any HTTP method in lowercase.
 ### Read the body
 
 ```erlang
-{ok, Body} = hackney:body(Client).
+{ok, Body} = hackney:body(ClientRef).
 ```
 
 `hackney:body/1` fetch the body. To fetch it by chunk you can use the
@@ -158,7 +158,7 @@ where `Method`, can be any HTTP method in lowercase.
 ```erlang
 
 read_body(MaxLength, Ref, Acc) when MaxLength > byte_size(Acc) ->
-	case stream_body(Ref) of
+	case hackney:stream_body(Ref) of
 		{ok, Data} ->
 			read_body(MaxLength, Ref, << Acc/binary, Data/binary >>);
 		done ->
@@ -186,16 +186,25 @@ couple of requests.
 
 ```erlang
 
-Transport = hackney_tcp,
-Host = << "https://friendpaste.com" >>,
+Transport = hackney_ssl,
+Host = << "friendpaste.com" >>,
 Port = 443,
 Options = [],
-{ok, ConnRef} = hackney:connect(Transport, Host, Port, Options)
+{ok, ConnRef} = hackney:connect(Transport, Host, Port, Options).
 ```
 
 > To create a connection that will use an HTTP proxy use
 > `hackney_http_proxy:connect_proxy/5` instead.
 
+
+#### To get local and remote ip and port information of a connection:
+
+```erlang
+
+> hackney:peername(ConnRef).
+> hackney:sockname(ConnRef).
+```
+
 #### Make a request
 
 Once you created a connection use the `hackney:send_request/2` function
@@ -207,9 +216,9 @@ ReqBody = << "{	\"snippet\": \"some snippet\" }" >>,
 ReqHeaders = [{<<"Content-Type">>, <<"application/json">>}],
 NextPath = <<"/">>,
 NextMethod = post,
-NextReq = {NextMethod, NextPath, ReqHeaders, ReqBody}
+NextReq = {NextMethod, NextPath, ReqHeaders, ReqBody},
 {ok, _, _, ConnRef} = hackney:send_request(ConnRef, NextReq).
-{ok, Body1} = hackney:body(ConnRef),
+{ok, Body1} = hackney:body(ConnRef).
 ```
 
 Here we are posting a JSON payload to '/' on the friendpaste service to

doc/hackney.md

@@ -46,7 +46,7 @@ url() = #hackney_url{} | binary()
 length doesn't go over MaxLength.</td></tr><tr><td valign="top"><a href="#cancel_request-1">cancel_request/1</a></td><td>Extract raw informations from the client context
 This feature can be useful when you want to create a simple proxy, rerouting
 on the headers and the status line and continue to forward the connection for example.</td></tr><tr><td valign="top"><a href="#close-1">close/1</a></td><td>close the client.</td></tr><tr><td valign="top"><a href="#connect-1">connect/1</a></td><td></td></tr><tr><td valign="top"><a href="#connect-2">connect/2</a></td><td></td></tr><tr><td valign="top"><a href="#connect-3">connect/3</a></td><td>connect a socket and create a client state.</td></tr><tr><td valign="top"><a href="#connect-4">connect/4</a></td><td></td></tr><tr><td valign="top"><a href="#controlling_process-2">controlling_process/2</a></td><td>Assign a new controlling process <em>Pid</em> to <em>Client</em>.</td></tr><tr><td valign="top"><a href="#cookies-1">cookies/1</a></td><td></td></tr><tr><td valign="top"><a href="#finish_send_body-1">finish_send_body/1</a></td><td></td></tr><tr><td valign="top"><a href="#location-1">location/1</a></td><td>return the requested location.</td></tr><tr><td valign="top"><a href="#pause_stream-1">pause_stream/1</a></td><td>pause a response stream, the stream process will hibernate and
-be woken later by the resume function.</td></tr><tr><td valign="top"><a href="#redirect_location-1">redirect_location/1</a></td><td></td></tr><tr><td valign="top"><a href="#request-1">request/1</a></td><td>make a request.</td></tr><tr><td valign="top"><a href="#request-2">request/2</a></td><td>make a request.</td></tr><tr><td valign="top"><a href="#request-3">request/3</a></td><td>make a request.</td></tr><tr><td valign="top"><a href="#request-4">request/4</a></td><td>make a request.</td></tr><tr><td valign="top"><a href="#request-5">request/5</a></td><td>make a request.</td></tr><tr><td valign="top"><a href="#request_info-1">request_info/1</a></td><td>get request info.</td></tr><tr><td valign="top"><a href="#resume_stream-1">resume_stream/1</a></td><td>resume a paused response stream, the stream process will be
+be woken later by the resume function.</td></tr><tr><td valign="top"><a href="#peername-1">peername/1</a></td><td>peername of the client.</td></tr><tr><td valign="top"><a href="#redirect_location-1">redirect_location/1</a></td><td></td></tr><tr><td valign="top"><a href="#request-1">request/1</a></td><td>make a request.</td></tr><tr><td valign="top"><a href="#request-2">request/2</a></td><td>make a request.</td></tr><tr><td valign="top"><a href="#request-3">request/3</a></td><td>make a request.</td></tr><tr><td valign="top"><a href="#request-4">request/4</a></td><td>make a request.</td></tr><tr><td valign="top"><a href="#request-5">request/5</a></td><td>make a request.</td></tr><tr><td valign="top"><a href="#request_info-1">request_info/1</a></td><td>get request info.</td></tr><tr><td valign="top"><a href="#resume_stream-1">resume_stream/1</a></td><td>resume a paused response stream, the stream process will be
 awoken.</td></tr><tr><td valign="top"><a href="#send_body-2">send_body/2</a></td><td>send the request body until eob.</td></tr><tr><td valign="top"><a href="#send_multipart_body-2">send_multipart_body/2</a></td><td>send a multipart body until eof
 Possible value are :
 <ul>
@@ -71,7 +71,7 @@ multipart content</li>
 multipart content</li>
 </ul><p></p>Note: You can calculate the full length of a multipart stream using
 the function <code>hackney_multipart:len_mp_stream/2</code> .</td></tr><tr><td valign="top"><a href="#send_request-2">send_request/2</a></td><td>send a request using the current client state.</td></tr><tr><td valign="top"><a href="#send_request-3">send_request/3</a></td><td>send a request using the current client state and pass new
-options to it.</td></tr><tr><td valign="top"><a href="#setopts-2">setopts/2</a></td><td>set client options.</td></tr><tr><td valign="top"><a href="#skip_body-1">skip_body/1</a></td><td>skip the full body.</td></tr><tr><td valign="top"><a href="#skip_multipart-1">skip_multipart/1</a></td><td>Stream the response body.</td></tr><tr><td valign="top"><a href="#start_response-1">start_response/1</a></td><td>start a response.</td></tr><tr><td valign="top"><a href="#stop_async-1">stop_async/1</a></td><td>stop to receive asynchronously.</td></tr><tr><td valign="top"><a href="#stream_body-1">stream_body/1</a></td><td>Stream the response body.</td></tr><tr><td valign="top"><a href="#stream_multipart-1">stream_multipart/1</a></td><td>Stream the response body.</td></tr><tr><td valign="top"><a href="#stream_next-1">stream_next/1</a></td><td>continue to the next stream message.</td></tr></table>
+options to it.</td></tr><tr><td valign="top"><a href="#setopts-2">setopts/2</a></td><td>set client options.</td></tr><tr><td valign="top"><a href="#skip_body-1">skip_body/1</a></td><td>skip the full body.</td></tr><tr><td valign="top"><a href="#skip_multipart-1">skip_multipart/1</a></td><td>Stream the response body.</td></tr><tr><td valign="top"><a href="#sockname-1">sockname/1</a></td><td>sockname of the client.</td></tr><tr><td valign="top"><a href="#start_response-1">start_response/1</a></td><td>start a response.</td></tr><tr><td valign="top"><a href="#stop_async-1">stop_async/1</a></td><td>stop to receive asynchronously.</td></tr><tr><td valign="top"><a href="#stream_body-1">stream_body/1</a></td><td>Stream the response body.</td></tr><tr><td valign="top"><a href="#stream_multipart-1">stream_multipart/1</a></td><td>Stream the response body.</td></tr><tr><td valign="top"><a href="#stream_next-1">stream_next/1</a></td><td>continue to the next stream message.</td></tr></table>
 
 
 <a name="functions"></a>
@@ -208,6 +208,14 @@ pause_stream(Ref::<a href="#type-client_ref">client_ref()</a>) -&gt; ok | {error
 pause a response stream, the stream process will hibernate and
 be woken later by the resume function
 
+<a name="peername-1"></a>
+
+### peername/1 ###
+
+`peername(Ref) -> any()`
+
+peername of the client
+
 <a name="redirect_location-1"></a>
 
 ### redirect_location/1 ###
@@ -547,6 +555,14 @@ skip_multipart(Ref::<a href="#type-client_ref">client_ref()</a>) -&gt; ok | {err
 
 Stream the response body.
 
+<a name="sockname-1"></a>
+
+### sockname/1 ###
+
+`sockname(Ref) -> any()`
+
+sockname of the client
+
 <a name="start_response-1"></a>
 
 ### start_response/1 ###

doc/hackney_connect.md

@@ -9,7 +9,7 @@
 ## Function Index ##
 
 
-<table width="100%" border="1" cellspacing="0" cellpadding="2" summary="function index"><tr><td valign="top"><a href="#check_or_close-1">check_or_close/1</a></td><td></td></tr><tr><td valign="top"><a href="#close-1">close/1</a></td><td>close the client.</td></tr><tr><td valign="top"><a href="#connect-3">connect/3</a></td><td></td></tr><tr><td valign="top"><a href="#connect-4">connect/4</a></td><td></td></tr><tr><td valign="top"><a href="#connect-5">connect/5</a></td><td></td></tr><tr><td valign="top"><a href="#create_connection-4">create_connection/4</a></td><td>create a connection and return a client state.</td></tr><tr><td valign="top"><a href="#create_connection-5">create_connection/5</a></td><td></td></tr><tr><td valign="top"><a href="#is_pool-1">is_pool/1</a></td><td>get current pool pid or name used by a client if needed.</td></tr><tr><td valign="top"><a href="#maybe_connect-1">maybe_connect/1</a></td><td>connect a socket and create a client state.</td></tr><tr><td valign="top"><a href="#partial_chain-1">partial_chain/1</a></td><td></td></tr><tr><td valign="top"><a href="#reconnect-4">reconnect/4</a></td><td></td></tr><tr><td valign="top"><a href="#set_sockopts-2">set_sockopts/2</a></td><td>add set sockets options in the client.</td></tr><tr><td valign="top"><a href="#ssl_opts-2">ssl_opts/2</a></td><td></td></tr></table>
+<table width="100%" border="1" cellspacing="0" cellpadding="2" summary="function index"><tr><td valign="top"><a href="#check_or_close-1">check_or_close/1</a></td><td></td></tr><tr><td valign="top"><a href="#close-1">close/1</a></td><td>close the client.</td></tr><tr><td valign="top"><a href="#connect-3">connect/3</a></td><td></td></tr><tr><td valign="top"><a href="#connect-4">connect/4</a></td><td></td></tr><tr><td valign="top"><a href="#connect-5">connect/5</a></td><td></td></tr><tr><td valign="top"><a href="#create_connection-4">create_connection/4</a></td><td>create a connection and return a client state.</td></tr><tr><td valign="top"><a href="#create_connection-5">create_connection/5</a></td><td></td></tr><tr><td valign="top"><a href="#is_pool-1">is_pool/1</a></td><td>get current pool pid or name used by a client if needed.</td></tr><tr><td valign="top"><a href="#maybe_connect-1">maybe_connect/1</a></td><td>connect a socket and create a client state.</td></tr><tr><td valign="top"><a href="#partial_chain-1">partial_chain/1</a></td><td></td></tr><tr><td valign="top"><a href="#peername-1">peername/1</a></td><td>get the address and port for the other end of current connection in the client.</td></tr><tr><td valign="top"><a href="#reconnect-4">reconnect/4</a></td><td></td></tr><tr><td valign="top"><a href="#set_sockopts-2">set_sockopts/2</a></td><td>add set sockets options in the client.</td></tr><tr><td valign="top"><a href="#sockname-1">sockname/1</a></td><td>the local address and port of current socket in the client.</td></tr><tr><td valign="top"><a href="#ssl_opts-2">ssl_opts/2</a></td><td></td></tr></table>
 
 
 <a name="functions"></a>
@@ -84,6 +84,14 @@ connect a socket and create a client state.
 
 `partial_chain(Certs) -> any()`
 
+<a name="peername-1"></a>
+
+### peername/1 ###
+
+`peername(Client) -> any()`
+
+get the address and port for the other end of current connection in the client
+
 <a name="reconnect-4"></a>
 
 ### reconnect/4 ###
@@ -98,6 +106,14 @@ connect a socket and create a client state.
 
 add set sockets options in the client
 
+<a name="sockname-1"></a>
+
+### sockname/1 ###
+
+`sockname(Client) -> any()`
+
+the local address and port of current socket in the client
+
 <a name="ssl_opts-2"></a>
 
 ### ssl_opts/2 ###

doc/overview.edoc

@@ -118,8 +118,8 @@ $ ./rebar3 shell
 It is suggested that you install rebar3 user-wide as described [here](http://blog.erlware.org/rebar3-features-part-1-local-install-and-upgrade/).
 This fixes zsh (and maybe other shells) escript-related bugs. Also this should speed things up.
 
-<pre lang="erlang-repl">
-1>> application:ensure_all_started(hackney).
+<pre lang="erlang">
+> application:ensure_all_started(hackney).
 ok</pre>
 
 It will start hackney and all of the application it depends on:
@@ -161,14 +161,14 @@ where `Method', can be any HTTP method in lowercase.
 
 ### Read the body
 
-<pre lang="erlang">{ok, Body} = hackney:body(Client).</pre>
+<pre lang="erlang">{ok, Body} = hackney:body(ClientRef).</pre>
 
 `hackney:body/1' fetch the body. To fetch it by chunk you can use the
 `hackney:stream_body/1' function:
 
 <pre lang="erlang">
 read_body(MaxLength, Ref, Acc) when MaxLength > byte_size(Acc) ->
-	case stream_body(Ref) of
+	case hackney:stream_body(Ref) of
 		{ok, Data} ->
 			read_body(MaxLength, Ref, &lt;&lt; Acc/binary, Data/binary >>);
 		done ->
@@ -194,15 +194,21 @@ couple of requests.
 #### To create a connection:
 
 <pre lang="erlang">
-Transport = hackney_tcp,
-Host = &lt;&lt; "https://friendpaste.com" >>,
+Transport = hackney_ssl,
+Host = &lt;&lt; "friendpaste.com" >>,
 Port = 443,
 Options = [],
-{ok, ConnRef} = hackney:connect(Transport, Host, Port, Options)</pre>
+{ok, ConnRef} = hackney:connect(Transport, Host, Port, Options).</pre>
 
 > To create a connection that will use an HTTP proxy use
 > `hackney_http_proxy:connect_proxy/5' instead.
 
+#### To get local and remote ip and port information of a connection:
+
+<pre lang="erlang">
+> hackney:peername(ConnRef).
+> hackney:sockname(ConnRef).</pre>
+
 #### Make a request
 
 Once you created a connection use the `hackney:send_request/2' function
@@ -213,9 +219,9 @@ ReqBody = &lt;&lt; "{	\"snippet\": \"some snippet\" }" >>,
 ReqHeaders = [{&lt;&lt;"Content-Type">>, &lt;&lt;"application/json">>}],
 NextPath = &lt;&lt;"/">>,
 NextMethod = post,
-NextReq = {NextMethod, NextPath, ReqHeaders, ReqBody}
-{ok, _, _, ConnRef} = hackney:send_request(ConnRef, NextReq).
-{ok, Body1} = hackney:body(ConnRef),</pre>
+NextReq = {NextMethod, NextPath, ReqHeaders, ReqBody},
+{ok, _, _, ConnRef} = hackney:send_request(ConnRef, NextReq),
+{ok, Body1} = hackney:body(ConnRef).</pre>
 
 Here we are posting a JSON payload to '/' on the friendpaste service to
 create a paste. Then we close the client connection.

src/hackney.erl

@@ -8,6 +8,8 @@
 
 -export([connect/1, connect/2, connect/3, connect/4,
          close/1,
+         peername/1,
+         sockname/1,
          request_info/1,
          location/1,
          request/1, request/2, request/3, request/4, request/5,
@@ -116,6 +118,14 @@ close(Ref) ->
   hackney_connect:close(Ref).
 
 
+%% @doc peername of the client
+peername(Ref) ->
+  hackney_connect:peername(Ref).
+
+%% @doc sockname of the client
+sockname(Ref) ->
+  hackney_connect:sockname(Ref).
+
 %% @doc get request info
 -spec request_info(client_ref()) -> list().
 request_info(Ref) ->

src/hackney_connect.erl

@@ -12,6 +12,8 @@
          set_sockopts/2,
          ssl_opts/2,
          check_or_close/1,
+         peername/1,
+         sockname/1,
          close/1,
          is_pool/1]).
 
@@ -135,6 +137,29 @@ set_sockopts(#client{transport=Transport, socket=Skt}, Options) ->
   Transport:setopts(Skt, Options).
 
 
+%% @doc get the address and port for the other end of current connection in the client
+peername(#client{transport=Transport, socket=Socket}) ->
+  Transport:peername(Socket);
+peername(Ref) when is_reference(Ref) ->
+  case hackney_manager:get_state(Ref) of
+    req_not_found ->
+      req_not_found;
+    Client ->
+      peername(Client)
+  end.
+
+
+%% @doc the local address and port of current socket in the client
+sockname(#client{transport=Transport, socket=Socket}) ->
+  Transport:sockname(Socket);
+sockname(Ref) when is_reference(Ref) ->
+  case hackney_manager:get_state(Ref) of
+    req_not_found ->
+      req_not_found;
+    Client ->
+      sockname(Client)
+  end.
+
 %% @doc close the client
 %%
 %%