Yaw/Altitude estimation sensor fusion

docs/Settings.md

@@ -242,6 +242,16 @@ Inertial Measurement Unit KP Gain for compass measurements
 
 ---
 
+### ahrs_gps_yaw_weight
+
+Arhs gps yaw weight when mag is avaliable, 0 means no gps yaw, 100 means equal weight as compass
+
+| Default | Min | Max |
+| --- | --- | --- |
+| 100 | 0 | 500 |
+
+---
+
 ### ahrs_gps_yaw_windcomp
 
 Wind compensation in heading estimation from gps groundcourse(fixed wing only)
@@ -1474,11 +1484,11 @@ Enable automatic configuration of UBlox GPS receivers.
 
 ### gps_dyn_model
 
-GPS navigation model: Pedestrian, Air_1g, Air_4g. Default is AIR_1G. Use pedestrian with caution, can cause flyaways with fast flying.
+GPS navigation model: Pedestrian, Automotive, Air<1g, Air<2g, Air<4g. Default is AIR_2G. Use pedestrian/Automotive with caution, can cause flyaways with fast flying.
 
 | Default | Min | Max |
 | --- | --- | --- |
-| AIR_1G |  |  |
+| AIR_2G |  |  |
 
 ---
 
@@ -1912,33 +1922,23 @@ Decay coefficient for estimated velocity when GPS reference for position is lost
 
 ---
 
-### inav_w_xyz_acc_p
-
-_// TODO_
-
-| Default | Min | Max |
-| --- | --- | --- |
-| 1.0 | 0 | 1 |
-
----
-
 ### inav_w_z_baro_p
 
-Weight of barometer measurements in estimated altitude and climb rate
+Weight of barometer measurements in estimated altitude and climb rate. Setting is used on both airplanes and multirotors.
 
 | Default | Min | Max |
 | --- | --- | --- |
-| 0.35 | 0 | 10 |
+| 0.4 | 0 | 10 |
 
 ---
 
 ### inav_w_z_gps_p
 
-Weight of GPS altitude measurements in estimated altitude. Setting is used only of airplanes
+Weight of GPS altitude measurements in estimated altitude. Setting is used on both airplanes and multirotors.
 
 | Default | Min | Max |
 | --- | --- | --- |
-| 0.2 | 0 | 10 |
+| 0.4 | 0 | 10 |
 
 ---
 
@@ -1948,7 +1948,7 @@ Weight of GPS climb rate measurements in estimated climb rate. Setting is used o
 
 | Default | Min | Max |
 | --- | --- | --- |
-| 0.1 | 0 | 10 |
+| 0.8 | 0 | 10 |
 
 ---
 

src/main/blackbox/blackbox.c

@@ -310,6 +310,7 @@ static const blackboxDeltaFieldDefinition_t blackboxMainFields[] = {
     {"accSmooth",   0, SIGNED,   .Ipredict = PREDICT(0),       .Iencode = ENCODING(SIGNED_VB),   .Ppredict = PREDICT(AVERAGE_2),     .Pencode = ENCODING(SIGNED_VB), FLIGHT_LOG_FIELD_CONDITION_ACC},
     {"accSmooth",   1, SIGNED,   .Ipredict = PREDICT(0),       .Iencode = ENCODING(SIGNED_VB),   .Ppredict = PREDICT(AVERAGE_2),     .Pencode = ENCODING(SIGNED_VB), FLIGHT_LOG_FIELD_CONDITION_ACC},
     {"accSmooth",   2, SIGNED,   .Ipredict = PREDICT(0),       .Iencode = ENCODING(SIGNED_VB),   .Ppredict = PREDICT(AVERAGE_2),     .Pencode = ENCODING(SIGNED_VB), FLIGHT_LOG_FIELD_CONDITION_ACC},
+    {"accVib",     -1, UNSIGNED, .Ipredict = PREDICT(0),       .Iencode = ENCODING(UNSIGNED_VB), .Ppredict = PREDICT(AVERAGE_2),     .Pencode = ENCODING(SIGNED_VB), FLIGHT_LOG_FIELD_CONDITION_ACC},
     {"attitude",    0, SIGNED,   .Ipredict = PREDICT(0),       .Iencode = ENCODING(SIGNED_VB),   .Ppredict = PREDICT(AVERAGE_2),     .Pencode = ENCODING(SIGNED_VB), FLIGHT_LOG_FIELD_CONDITION_ATTITUDE},
     {"attitude",    1, SIGNED,   .Ipredict = PREDICT(0),       .Iencode = ENCODING(SIGNED_VB),   .Ppredict = PREDICT(AVERAGE_2),     .Pencode = ENCODING(SIGNED_VB), FLIGHT_LOG_FIELD_CONDITION_ATTITUDE},
     {"attitude",    2, SIGNED,   .Ipredict = PREDICT(0),       .Iencode = ENCODING(SIGNED_VB),   .Ppredict = PREDICT(AVERAGE_2),     .Pencode = ENCODING(SIGNED_VB), FLIGHT_LOG_FIELD_CONDITION_ATTITUDE},
@@ -487,6 +488,7 @@ typedef struct blackboxMainState_s {
     int16_t gyroPeaksYaw[DYN_NOTCH_PEAK_COUNT];
 
     int16_t accADC[XYZ_AXIS_COUNT];
+    int16_t accVib;
     int16_t attitude[XYZ_AXIS_COUNT];
     int32_t debug[DEBUG32_VALUE_COUNT];
     int16_t motor[MAX_SUPPORTED_MOTORS];
@@ -917,6 +919,7 @@ static void writeIntraframe(void)
 
     if (testBlackboxCondition(FLIGHT_LOG_FIELD_CONDITION_ACC)) {
         blackboxWriteSigned16VBArray(blackboxCurrent->accADC, XYZ_AXIS_COUNT);
+        blackboxWriteUnsignedVB(blackboxCurrent->accVib);
     }
 
     if (testBlackboxCondition(FLIGHT_LOG_FIELD_CONDITION_ATTITUDE)) {
@@ -1182,6 +1185,7 @@ static void writeInterframe(void)
 
     if (testBlackboxCondition(FLIGHT_LOG_FIELD_CONDITION_ACC)) {
         blackboxWriteArrayUsingAveragePredictor16(offsetof(blackboxMainState_t, accADC), XYZ_AXIS_COUNT);
+        blackboxWriteSignedVB(blackboxCurrent->accVib - blackboxLast->accVib);
     }
 
     if (testBlackboxCondition(FLIGHT_LOG_FIELD_CONDITION_ATTITUDE)) {
@@ -1601,6 +1605,7 @@ static void loadMainState(timeUs_t currentTimeUs)
             blackboxCurrent->mcVelAxisOutput[i] = lrintf(nav_pids->vel[i].output_constrained);
         }
     }
+    blackboxCurrent->accVib = lrintf(accGetVibrationLevel() * acc.dev.acc_1G);
 
     if (STATE(FIXED_WING_LEGACY)) {
 

src/main/drivers/compass/compass_fake.c

@@ -37,7 +37,7 @@ static bool fakeMagInit(magDev_t *magDev)
 {
     UNUSED(magDev);
     // initially point north
-    fakeMagData[X] = 4096;
+    fakeMagData[X] = 1024;
     fakeMagData[Y] = 0;
     fakeMagData[Z] = 0;
     return true;

src/main/fc/fc_msp.c

@@ -478,7 +478,7 @@ static bool mspFcProcessOutCommand(uint16_t cmdMSP, sbuf_t *dst, mspPostProcessF
             }
             for (int i = 0; i < 3; i++) {
 #ifdef USE_MAG
-                sbufWriteU16(dst, mag.magADC[i]);
+                sbufWriteU16(dst, lrintf(mag.magADC[i]));
 #else
                 sbufWriteU16(dst, 0);
 #endif

src/main/fc/settings.yaml

@@ -50,7 +50,7 @@ tables:
     values: ["AUTO", "EGNOS", "WAAS", "MSAS", "GAGAN", "SPAN", "NONE"]
     enum: sbasMode_e
   - name: gps_dyn_model
-    values: ["PEDESTRIAN", "AIR_1G", "AIR_4G"]
+    values: ["PEDESTRIAN","AUTOMOTIVE", "AIR_1G", "AIR_2G", "AIR_4G"]
     enum: gpsDynModel_e
   - name: reset_type
     values: ["NEVER", "FIRST_ARM", "EACH_ARM"]
@@ -1463,6 +1463,12 @@ groups:
         default_value: ADAPTIVE
         field: inertia_comp_method
         table: imu_inertia_comp_method
+      - name: ahrs_gps_yaw_weight
+        description: "Arhs gps yaw weight when mag is avaliable, 0 means no gps yaw, 100 means equal weight as compass"
+        default_value: 100
+        field: gps_yaw_weight
+        min: 0
+        max: 500
 
   - name: PG_ARMING_CONFIG
     type: armingConfig_t
@@ -1608,8 +1614,8 @@ groups:
         table: gps_sbas_mode
         type: uint8_t
       - name: gps_dyn_model
-        description: "GPS navigation model: Pedestrian, Air_1g, Air_4g. Default is AIR_1G. Use pedestrian with caution, can cause flyaways with fast flying."
-        default_value: "AIR_1G"
+        description: "GPS navigation model: Pedestrian, Automotive, Air<1g, Air<2g, Air<4g. Default is AIR_2G. Use pedestrian/Automotive with caution, can cause flyaways with fast flying."
+        default_value: "AIR_2G"
         field: dynModel
         table: gps_dyn_model
         type: uint8_t
@@ -2322,23 +2328,23 @@ groups:
         max: 100
         default_value: 2.0
       - name: inav_w_z_baro_p
-        description: "Weight of barometer measurements in estimated altitude and climb rate"
+        description: "Weight of barometer measurements in estimated altitude and climb rate. Setting is used on both airplanes and multirotors."
         field: w_z_baro_p
         min: 0
         max: 10
-        default_value: 0.35
+        default_value: 0.4
       - name: inav_w_z_gps_p
-        description: "Weight of GPS altitude measurements in estimated altitude. Setting is used only of airplanes"
+        description: "Weight of GPS altitude measurements in estimated altitude. Setting is used on both airplanes and multirotors."
         field: w_z_gps_p
         min: 0
         max: 10
-        default_value: 0.2
+        default_value: 0.4
       - name: inav_w_z_gps_v
         description: "Weight of GPS climb rate measurements in estimated climb rate. Setting is used on both airplanes and multirotors."
         field: w_z_gps_v
         min: 0
         max: 10
-        default_value: 0.1
+        default_value: 0.8
       - name: inav_w_xy_gps_p
         description: "Weight of GPS coordinates in estimated UAV position and speed."
         default_value: 1.0
@@ -2363,11 +2369,6 @@ groups:
         field: w_xy_res_v
         min: 0
         max: 10
-      - name: inav_w_xyz_acc_p
-        field: w_xyz_acc_p
-        min: 0
-        max: 1
-        default_value: 1.0
       - name: inav_w_acc_bias
         description: "Weight for accelerometer drift estimation"
         default_value: 0.01