Stuck at step 2.4 #17
Comments
|
It's working, the wording in the guide is confusing, what you should normally see without changing the After making the change to something that does not match (a profile?) it will show the filename of the mixer path you edited. Also |
This comment was marked as off-topic.
This comment was marked as off-topic.
|
Can you share the full path of the mixer you edited and the changes you did? |
|
Also the output of |
|
omg I have written the info you asked for, but idk. It's just working as expected now. Oh, but I have lost my subwoofer now. It's only speakers that have sound Thanks so much for your help and creating this guide btw |
path: /etc/alsa-card-profile/mixer/paths/analog-output-lineout.conf |
|
BEFORE: Sink #54
State: SUSPENDED
Name: alsa_output.pci-0000_0a_00.4.analog-stereo
Description: Starship/Matisse HD Audio Controller Analog Stereo
Driver: PipeWire
Sample Specification: s32le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_0a_00.4.analog-stereo.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.card = "1"
alsa.card_name = "HD-Audio Generic"
alsa.class = "generic"
alsa.components = "HDA:10ec0b00,10438797,00100001"
alsa.device = "0"
alsa.driver_name = "snd_hda_intel"
alsa.id = "Generic"
alsa.long_card_name = "HD-Audio Generic at 0xfc400000 irq 100"
alsa.mixer_name = "Realtek ALCS1200A"
alsa.name = "ALCS1200A Analog"
alsa.resolution_bits = "16"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.sync.id = "00000000:00000000:00000000:00000000"
api.alsa.card.longname = "HD-Audio Generic at 0xfc400000 irq 100"
api.alsa.card.name = "HD-Audio Generic"
api.alsa.path = "front:1"
api.alsa.pcm.card = "1"
api.alsa.pcm.stream = "playback"
audio.channels = "2"
audio.position = "FL,FR"
card.profile.device = "5"
device.api = "alsa"
device.class = "sound"
device.id = "49"
device.profile.description = "Analog Stereo"
device.profile.name = "analog-stereo"
device.routes = "2"
factory.name = "api.alsa.pcm.sink"
media.class = "Audio/Sink"
device.description = "Starship/Matisse HD Audio Controller"
node.name = "alsa_output.pci-0000_0a_00.4.analog-stereo"
node.nick = "ALCS1200A Analog"
node.pause-on-idle = "false"
object.path = "alsa:acp:Generic:5:playback"
port.group = "playback"
priority.driver = "1009"
priority.session = "1009"
factory.id = "19"
clock.quantum-limit = "8192"
client.id = "46"
node.driver = "true"
node.loop.name = "data-loop.0"
library.name = "audioconvert/libspa-audioconvert"
object.id = "54"
object.serial = "54"
api.acp.auto-port = "false"
api.alsa.card = "1"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio1"
api.dbus.ReserveDevice1.Priority = "-20"
device.bus = "pci"
device.bus_path = "pci-0000:0a:00.4"
device.enum.api = "udev"
device.icon_name = "audio-card-analog-pci"
device.name = "alsa_card.pci-0000_0a_00.4"
device.nick = "HD-Audio Generic"
device.plugged.usec = "5470687"
device.product.id = "0x1487"
device.product.name = "Starship/Matisse HD Audio Controller"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:0a:00.4/sound/card1"
device.vendor.id = "0x1022"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
device.string = "1"
Ports:
analog-output-lineout: Line Out (type: Line, priority: 9000, availability group: Legacy 4, available)
analog-output-headphones: Headphones (type: Headphones, priority: 9900, availability group: Legacy 5, available)
Active Port: analog-output-headphones
Formats:
pcmAFTER: Sink #701
State: RUNNING
Name: alsa_output.pci-0000_0a_00.4.analog-surround-21
Description: Starship/Matisse HD Audio Controller Analog Surround 2.1
Driver: PipeWire
Sample Specification: s32le 3ch 48000Hz
Channel Map: front-left,front-right,lfe
Owner Module: 4294967295
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB, lfe: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_0a_00.4.analog-surround-21.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.card = "1"
alsa.card_name = "HD-Audio Generic"
alsa.class = "generic"
alsa.components = "HDA:10ec0b00,10438797,00100001"
alsa.device = "0"
alsa.driver_name = "snd_hda_intel"
alsa.id = "Generic"
alsa.long_card_name = "HD-Audio Generic at 0xfc400000 irq 100"
alsa.mixer_name = "Realtek ALCS1200A"
alsa.name = "ALCS1200A Analog"
alsa.resolution_bits = "16"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.sync.id = "00000000:00000000:00000000:00000000"
api.alsa.card.longname = "HD-Audio Generic at 0xfc400000 irq 100"
api.alsa.card.name = "HD-Audio Generic"
api.alsa.path = "surround21:1"
api.alsa.pcm.card = "1"
api.alsa.pcm.stream = "playback"
audio.channels = "3"
audio.position = "FL,FR,LFE"
card.profile.device = "7"
device.api = "alsa"
device.class = "sound"
device.id = "50"
device.profile.description = "Analog Surround 2.1"
device.profile.name = "analog-surround-21"
device.routes = "1"
factory.name = "api.alsa.pcm.sink"
media.class = "Audio/Sink"
device.description = "Starship/Matisse HD Audio Controller"
node.name = "alsa_output.pci-0000_0a_00.4.analog-surround-21"
node.nick = "ALCS1200A Analog"
node.pause-on-idle = "false"
object.path = "alsa:acp:Generic:7:playback"
port.group = "playback"
priority.driver = "1009"
priority.session = "1009"
factory.id = "19"
clock.quantum-limit = "8192"
client.id = "47"
node.driver = "true"
node.loop.name = "data-loop.0"
library.name = "audioconvert/libspa-audioconvert"
object.id = "257"
object.serial = "701"
node.max-latency = "16384/48000"
api.alsa.period-size = "1024"
api.alsa.period-num = "32"
api.alsa.headroom = "0"
api.acp.auto-port = "false"
api.alsa.card = "1"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio1"
api.dbus.ReserveDevice1.Priority = "-20"
device.bus = "pci"
device.bus_path = "pci-0000:0a:00.4"
device.enum.api = "udev"
device.icon_name = "audio-card-analog-pci"
device.name = "alsa_card.pci-0000_0a_00.4"
device.nick = "HD-Audio Generic"
device.plugged.usec = "5671613"
device.product.id = "0x1487"
device.product.name = "Starship/Matisse HD Audio Controller"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:0a:00.4/sound/card1"
device.vendor.id = "0x1022"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
device.string = "1"
Ports:
analog-output-lineout: Line Out (type: Line, priority: 9000, availability group: Legacy 4, available)
Active Port: analog-output-lineout
Formats:
pcm |
Up and down keys.
Unfortunately I haven't tried this on a device with more than two internal speakers maybe you need to un-mute/raise their volume? One observation:
|
Idk if it's related, but commenting the line got my subwoofers sound back. |
Nice!
Try stopping pipewire and wireplumber before trying to enable and store
De nada! |
Hello
I get that in step 2.2 I have to change the description-key from analog-output-lineout (my speakers) But I have done that, with every file with that name at /usr and /etc. Then I restart pipewire but there are no changes in the descriptions at the sink output.
I need some help to get through this.
SYS INFO
CODECS
CARDS
SINKS
The text was updated successfully, but these errors were encountered: