This is my Home Assistant Core configuration. My house runs with the KNX bus system. The majority of the automations are implemented inside KNX system. I use HA to connect other systems.
| Device | Connection | Home Assistant | Notes |
|---|---|---|---|
| MDT BE-02001 | KNX | KNX Binary Sensor | Universal Interface |
| MDT BE-04001 | KNX | KNX Binary Sensor | Universal Interface |
| MDT BE-16000 | KNX | KNX Binary Sensor | Binary Inputs for potential free contacts |
| Shelly Flood | MQTT | MQTT Binary Sensor | water leakage sensor |
| Device | Connection | Home Assistant | Notes |
|---|---|---|---|
| MDT JAL-0810 | KNX | KNX Cover | Shutter Actuator |
| Device | Connection | Home Assistant | Notes |
|---|---|---|---|
| MDT AKD-0401 | KNX | KNX Light | 230V Dimming Actuator |
| MDT AKD-0424R | KNX | KNX Light | 24V CV LED Dimming Actuator |
| Device | Connection | Home Assistant | Notes |
|---|---|---|---|
| MDT BE-GT2TW | KNX | KNX Sensor | Glass Push Button with temperature sensor |
| MDT BE-GTT4W | KNX | KNX Sensor | Glass Push Button with temperature sensor |
| BJ 6131/21 | KNX | KNX Sensor | Presence Detector, Light- and temperature sensor |
| MDT SCN-G360K3 | KNX | KNX Sensor | Presence Detector, Light- and temperature sensor |
| Steinel iHF 3D | KNX | KNX Sensor | Movement Detector |
| MDT SCN-WS3HW | KNX | KNX Sensor | Weather Station |
| Elabnet DS18B20 based sensors | 1-Wire | Onewire Sensor | Temperature sensor |
| Elabnet DS2438 based sensors | 1-Wire | Onewire Sensor | Humidity sensor |
| Device | Connection | Home Assistant | Notes |
|---|---|---|---|
| MDT AKK-0816 | KNX | KNX Switch | Switch Actuator |
| MDT AKS-1216 | KNX | KNX Switch | Switch Actuator |
| Device | Connection | Home Assistant | Notes |
|---|---|---|---|
| LG 43UM7500PLA | Ethernet | LB webOS | TV |
| Sonos Beam | Wifi | Sonos | Audio Playback and TTS |
| Sonos Play:1 | Wifi | Sonos | Audio Playback and TTS |
| Sonos Play:3 | Wifi | Sonos | Audio Playback and TTS |
| Device | Connection | Notes |
|---|---|---|
| Ubiquiti USG | Ethernet | Router |
| Ubiquiti USW | Ethernet | Switch |
| Ubiquiti UAP AC Lite | Ethernet/Wifi | Access Point |
| Device | Connection | Notes |
|---|---|---|
| Elabnet PBM01-USB | 1-Wire / USB | 1-Wire Busmaster |
| MDT SCN-LOG1 | KNX | Logic Module |
| MDT SCN-LK001 | KNX | Line Coupler |
| Weinzierl 730 | KNX / Ethernet | KNX IP Interface |
| Samsung Galaxy Tab A | Wifi | Wall mounted display with Fully Kiosk Browser showing Lovelace UI |
| Synology Diskstation DS918+ | Ethernet | NAS, running Home Assistant Core in Docker container |
| Raspberry Pi 2B with PiCAN 2 Board | CAN / MQTT | Connecting Rotex HPSU with pyHPSU over MQTT to HA |
| Rotex HPSU compact | CAN | Heat Pump |
| Device | Home Assistant | Notes |
|---|---|---|
| Mosquitto MQTT Broker | MQTT | running in Docker Container |
| pyHPSU | MQTT | send values (temperature, mode etc) from my Heat Pump to HA |
| Fully Kiosk Browser | Rest Command | power on / off tablet display when movement is detected |
| Nextcloud Calendar | CalDAV | Calendar |
Thanks to this (any many others) who are sharing their ha config, tipps and other useful information.