e2e: fix openkruise installtion and debug ovs installtion

Makefile

@@ -323,15 +323,18 @@ e2e_init_underlay:
 
 .PHONY: e2e_init_cilium_with_ebpf
 e2e_init_cilium_with_ebpf:
-	$(QUIET)  make e2e_init -e INSTALL_OVERLAY_CNI=true -e INSTALL_CALICO=false -e INSTALL_CILIUM=true DISABLE_KUBE_PROXY=true -e E2E_SPIDERPOOL_ENABLE_SUBNET=false
+	$(QUIET)  make e2e_init -e INSTALL_OVERLAY_CNI=true -e INSTALL_CALICO=false -e INSTALL_CILIUM=true DISABLE_KUBE_PROXY=true \
+	 -e E2E_SPIDERPOOL_ENABLE_SUBNET=false
 
 .PHONY: e2e_init_calico
 e2e_init_calico:
-	$(QUIET)  make e2e_init -e INSTALL_OVERLAY_CNI=true -e INSTALL_CALICO=true -e INSTALL_CILIUM=false -e E2E_SPIDERPOOL_ENABLE_SUBNET=false
+	$(QUIET)  make e2e_init -e INSTALL_OVERLAY_CNI=true -e INSTALL_CALICO=true -e INSTALL_CILIUM=false \
+	-e E2E_SPIDERPOOL_ENABLE_SUBNET=false
 
 .PHONY: e2e_init_cilium
 e2e_init_cilium:
-	$(QUIET)  make e2e_init -e INSTALL_OVERLAY_CNI=true -e INSTALL_CALICO=false -e INSTALL_CILIUM=true -e E2E_SPIDERPOOL_ENABLE_SUBNET=false
+	$(QUIET)  make e2e_init -e INSTALL_OVERLAY_CNI=true -e INSTALL_CALICO=false -e INSTALL_CILIUM=true \
+	-e E2E_SPIDERPOOL_ENABLE_SUBNET=false
 
 
 .PHONY: e2e_test

test/Makefile

@@ -191,7 +191,11 @@ setup_kurise:
 				docker pull $${IMAGE} ; \
 				kind load docker-image $${IMAGE} --name $(E2E_CLUSTER_NAME);	\
 			done; \
-			helm upgrade --install kruise openkruise/kruise --wait --timeout 20m --debug --set manager.image.repository=$(E2E_OPENKRUISE_IMAGE) \
+			HELM_OPTION=" --wait --timeout 20m --debug --set manager.image.repository=$(E2E_OPENKRUISE_IMAGE) " ; \
+			# openkruise failed to run with 1.7.3, see 
+			# https://github.com/spidernet-io/spiderpool/issues/4396
+			HELM_OPTION+=" --version $(E2E_OPENKRUISE_VERSION) " ; \
+			helm upgrade --install kruise openkruise/kruise $${HELM_OPTION} \
 			    --kubeconfig $(E2E_KUBECONFIG) || { KIND_CLUSTER_NAME=$(E2E_CLUSTER_NAME) ./scripts/debugEnv.sh $(E2E_KUBECONFIG) "detail" "$(E2E_LOG_FILE)" ; exit 1 ; } ; \
 
 .PHONY: setup_spiderpool

test/Makefile.defs

@@ -181,7 +181,9 @@ http_proxy ?=
 E2E_LOG_FILE ?= $(ROOT_DIR)/test/e2edebugLog.txt
 
 #========= openkruise =========
-
+# openkruise failed to run with 1.7.3, see 
+# https://github.com/spidernet-io/spiderpool/issues/4396
+E2E_OPENKRUISE_VERSION := 1.7.2
 ifeq ($(E2E_CHINA_IMAGE_REGISTRY),true)
     E2E_OPENKRUISE_IMAGE ?= docker.m.daocloud.io/openkruise/kruise-manager
 else

test/scripts/install-ovs.sh

@@ -5,7 +5,7 @@
 
 set -o errexit -o nounset -o pipefail
 
-CURRENT_FILENAME=$( basename $0 )
+CURRENT_FILENAME=$(basename $0)
 
 [ -z "${HTTP_PROXY}" ] || export https_proxy=${HTTP_PROXY}
 
@@ -25,7 +25,10 @@ echo "$CURRENT_FILENAME : HOST_ADDITIONAL_INTERFACE $HOST_ADDITIONAL_INTERFACE "
 echo "try to add secondary network nic for ovs bridge preparation"
 if ! docker network ls | grep -q "${DOCKER_ADDITIONAL_NETWORK}"; then
   echo "Docker network ${DOCKER_ADDITIONAL_NETWORK} does not exist, creating it..."
-  docker network create ${DOCKER_ADDITIONAL_NETWORK} --driver bridge || { echo "Failed to create Docker network"; exit 1; }
+  docker network create ${DOCKER_ADDITIONAL_NETWORK} --driver bridge || {
+    echo "Failed to create Docker network"
+    exit 1
+  }
 else
   echo "Docker network ${DOCKER_ADDITIONAL_NETWORK} already exists."
 fi
@@ -53,17 +56,16 @@ elif [ ${E2E_IP_FAMILY} == "dual" ]; then
   docker exec ${VLAN_GATEWAY_CONTAINER} ip addr add fd00:172:30::1/64 dev ${HOST_ADDITIONAL_INTERFACE}.${VLAN30}
   docker exec ${VLAN_GATEWAY_CONTAINER} ip addr add fd00:172:40::1/64 dev ${HOST_ADDITIONAL_INTERFACE}.${VLAN40}
 else
-    echo "error ip family, the value of IP_FAMILY must be of ipv4,ipv6 or dual." && exit 1
+  echo "error ip family, the value of IP_FAMILY must be of ipv4,ipv6 or dual." && exit 1
 fi
 
 echo -e "\033[35m Succeed to create vlan interface: ${HOST_ADDITIONAL_INTERFACE}.${VLAN30}、 ${HOST_ADDITIONAL_INTERFACE}.${VLAN40} in kind-node ${VLAN_GATEWAY_CONTAINER} \033[0m"
 
-
 # https://github.com/antrea-io/antrea/issues/51
 # fix: it possibley fails to insmod openvswitch.ko in the container in some OS version
 # so it could load the ko in the host os in advance to make sure the ovs service could be started in the container
 echo "=========install openvswitch in host os"
-sudo apt-get update 
+sudo apt-get update
 sudo apt-get install -y openvswitch-switch
 sudo modinfo openvswitch
 sudo systemctl start openvswitch-switch || true
@@ -78,32 +80,37 @@ for NODE in $KIND_NODES; do
   install_openvswitch() {
     for attempt in {1..5}; do
       echo "Attempt $attempt to install openvswitch on ${NODE}..."
-      if ! docker exec ${NODE} apt-get update ; then
+      if ! docker exec ${NODE} apt-get update; then
         echo "Failed to update package list on ${NODE}, retrying in 10s..."
         sleep 10
         continue
       fi
-      
-      if ! docker exec ${NODE} apt-get install -y openvswitch-switch ; then
+
+      if ! docker exec ${NODE} apt-get install -y openvswitch-switch; then
         echo "Failed to install openvswitch on ${NODE}, retrying in 10s..."
         sleep 10
         continue
       fi
-      
+
       echo "Succeed to install openvswitch on ${NODE}"
       return 0
     done
 
     echo "Error: Failed to install openvswitch on ${NODE} after 5 attempts." >&2
     return 1
   }
-  
+
   echo "=========install openvswitch"
   install_openvswitch
 
   echo "start ovs service and add bridge"
-  { docker exec ${NODE} systemctl start openvswitch-switch ; } \
-      || { docker exec ${NODE} journalctl -xe ; docker exec ${NODE} systemctl status openvswitch-switch ; docker exec ${NODE} journalctl -u openvswitch-switch ; exit 1 ; }
+  { docker exec ${NODE} systemctl start openvswitch-switch; } ||
+    {
+      docker exec ${NODE} journalctl -xe
+      docker exec ${NODE} systemctl status openvswitch-switch
+      docker exec ${NODE} journalctl -u openvswitch-switch
+      exit 1
+    }
 
   docker exec ${NODE} ovs-vsctl add-br ${BRIDGE_INTERFACE}
   docker exec ${NODE} ovs-vsctl add-port ${BRIDGE_INTERFACE} ${HOST_ADDITIONAL_INTERFACE}
@@ -139,4 +146,3 @@ for NODE in $KIND_NODES; do
 done
 
 echo -e "\033[35m Succeed to install openvswitch \033[0m"
-