Skip to content

Loading the vertical pulling program

Robert Walder edited this page Jul 21, 2017 · 4 revisions

Once you have installed the vertical pulling program, you may proceed with the following procedure to load and initialize the program.

  1. You must load the CenteredForcePulls.ipf file into Igor Pro. Go to File dropdown menu, open file, then procedure.

Load Igor Proc

  1. Compile the procedure using the compile button at the bottom of the procedure window.

Compile Igor Proc

  1. After that you can select "Initialize CFP" from the "Centered Force Pulls" dropdown menu

Initialize Centered force pulls

Important: The cypher needs to be turned on with the Asylum Research software loaded before loading this software. I recommend you also do all calibrations and get your AFM tip down to the surface before loading this software.